Fluke 1664FC Multifunction Tester 1000V Earth Resistance Measurement With USB

查看所有Multifunction Testers

小計（1 件）*

TWD91,346.00

(不含稅)

TWD95,913.30

(含稅)

Add to Basket
選擇或輸入數量
庫存資訊目前無法存取 - 請稍後再回來查看
單位
每單位
1 +TWD91,346.00

* 參考價格

RS庫存編號:
117-6678
Distrelec 貨號:
300-60-472
製造零件編號:
FLK-1664FC DE
製造商:
Fluke
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Fluke

Product Type

Multifunction Tester

Loop Impedance Test Type

Phase to Neutral, Phase to Earth

Automatic RCD Test

Yes

RCD Ramp Test

Yes

Model Number

1664FC

Insulation Test Voltage

1000V

Maximum Voltage Measurement

500V ac/dc

Test Type

Insulation Resistance, Frequency, Miniature GPS, Wiring Polarity, MOSFET, Continuity, Resistance, RCD Test, Voltage, Phase Sequence Test

Earth Resistance Measurement

Yes

Downloadable Data

Yes

Interface Type

USB

Continuity Test Current

1mA

RCD Test Type

Type S, AC, Type G

Width

250mm

Standards/Approvals

EN/IEC 610102034, EN/IEC 610101, CSA, CE

Weight

1.3kg

Length

100mm

Remote Switch Mode

Yes

Height

125mm

IP Rating

IP40

Test Standards

EN, IEC 61010-2-034, IEC 61010-1

Safety Category Level

CAT IV, CAT III

Minimum Continuity Resistance

20Ω

Battery Type

AA

Display Type

LCD

Power Source

Battery

Safety Category Voltage

300, 500V

Maximum Continuity Resistance

2000Ω

豁免

COO (Country of Origin):
GB

Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1664FC DE


This multifunction tester provides essential installation diagnostics for electricians and engineers working in automation, electronics and mechanical environments. It performs insulation, continuity, loop and RCD assessments alongside voltage and frequency checks, offering a compact, battery-powered instrument for on-site verification and fault analysis.

Features & Benefits


• Insulation tester 1000V delivers up to 1000V for insulation measurement and high-resistance detection
• Portable continuity tester 1mA uses 1mA test current for sensitive conductor checks
• Loop impedance tester phase to earth offers L-PE and L-N loop assessment for PSC/PEFC calculation
• RCD ramp test tester performs stepped ramp tests from 30% to 110% of rated current
• Multifunction electrician tester 500V measures AC/DC voltages to 500V with 0.8% accuracy
• CAT IV 300V CAT III 500V tester provides overvoltage protection for varied installation tiers

**Applications**


• Suitable for commissioning and periodic inspection of electrical installations
• Ideal for motor winding continuity and resistance verification
• Used for on-site RCD performance validation including tripping time measurement
• Can be used for calculating prospective earth fault and short-circuit currents
• Used with distribution boards for wiring polarity and phase-sequence checks

How is data exported for reporting and analysis?


The instrument includes a USB Interface enabling downloadable data transfer to a PC for Record keeping and post-test review.

What power source and battery life provisions are used for fieldwork?


It operates from six AA batteries, supporting portable use without mains power and simplifying battery replacement.

Which RCD types and test modes are supported during protection verification?


The tester exercises Type A, AC, G and S RCDs, providing variable current, tripping time and ramp-step measurements for each type.

How does it compensate for test leads and mains cord resistance?


A dedicated zero adaptor and lead compensation routine allow accurate loop and continuity results by offsetting lead and cord influences.

What environmental sealing and safety standards does it meet?


The unit has IP40 ingress protection and complies with EN/IEC 61010 series and EN 61557 performance requirements.

相關連結