最近搜索

    Electromen OY, DC Motor Controller, Analogue Control, 10 → 35 V, 15 A, DIN Rail

    RS庫存編號:
    183-7332
    製造零件編號:
    EM-241B-PLI
    製造商:
    Electromen OY
    Electromen OY
    查看所有Motor Controllers
    4 現貨庫存,可於6工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    原價 TWD4,310.00

    您付款

    TWD3,850.00

    (不含稅)

    TWD4,042.50

    (含稅)

    單位Per unit
    1 +TWD3,850.00
    RS庫存編號:
    183-7332
    製造零件編號:
    EM-241B-PLI
    製造商:
    Electromen OY
    COO (Country of Origin):
    FI

    產品概覽和技術數據資料表


    法例與合規

    COO (Country of Origin):
    FI

    產品詳細資訊

    Electromen - EM-241PLI DC MOTOR POSITION CONTROLLER, 12-24 V DC, 15 A


    The EM-241-PLI is a full bridge brushed DC-motor starter.It is designed to work in a wide range of applications and offers a host of adjustments to optimise control for each application.The drive has adjustable acceleration and deceleration ramps to produce smooth starts and stops,adjustable current limit protects motor against overcurrent and can also be used to provide an end-stop on current trip

    The PLI version has a PULSE COUNTER which can be used to define end stops - the count setting is stored in non-volatile memory
    This device has also two settable speeds, which are useful in positioning applications
    Control inputs are present for basic forward, backward and stop commands, as well as limit switch inputs to define end stops
    This device has also two settable speeds, this can be activated by dedicated input. The same input can be used for analogue speed control signal 0-5V
    Fault output can indicate current trip, over-current or zero-current conditions. It can also be pulled down to ground to disable the drive, if required
    C-version includes wo new parameter: freewheel options for release the rotor of motor, selectable pwm frequency (16kHz pwm being inaudible though current handling capacity is reduced)
    There are two selectable control modes, in continuous mode the motor runs as long as the control is active, in impulse mode it will operate from a momentary command
    Special settings are also available for start-up kick and auto reverse
    For parameters setting there are 3 options: EM-236 interface unit, EM-268 with Menthol-Lite PC-program and EM-326 with Menthol-App application for smartphone

    Small size with high current output
    2ch pulse counter inputs
    Pulse counter limits.
    Current limit 0.1-20A (30A at start up)
    Zero current limit
    Overvoltage brake
    Speed setting
    Flexible control inputs
    impulse / continuous mode
    DIN rail mountable
    Programmable parameters to suit application
    * Continuous current output when ambient temp is <50°C )
    15A at 100% speed / 10A at 5-99% speed pwm=2kHz
    Peak ( 5s.) 30A at 2khz PWM


    規格

    屬性
    Supply Voltage10 → 35 V
    Current Rating15 A
    Voltage Rating35 V
    4 現貨庫存,可於6工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    原價 TWD4,310.00

    您付款

    TWD3,850.00

    (不含稅)

    TWD4,042.50

    (含稅)

    單位Per unit
    1 +TWD3,850.00