最近搜索

    Electromen OY DC Motor Controller, 20 → 60 V dc, 10 A, 24 → 48 V dc

    RS庫存編號:
    183-7331
    製造零件編號:
    EM-241C 48V
    製造商:
    Electromen OY
    Electromen OY
    查看所有Motor Controllers
    15 現貨庫存,可於6工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    原價 TWD4,175.00

    您付款

    TWD3,758.00

    (不含稅)

    TWD3,945.90

    (含稅)

    單位Per unit
    1 +TWD3,758.00
    RS庫存編號:
    183-7331
    製造零件編號:
    EM-241C 48V
    製造商:
    Electromen OY
    COO (Country of Origin):
    FI

    產品概覽和技術數據資料表


    法例與合規

    COO (Country of Origin):
    FI

    產品詳細資訊

    Electromen - EM-241C DC MOTOR CONTROLLER, 24-48 V DC, 10 A


    The EM-241C-48V is a full bridge brushed DC-motor starter.
    It is designed to work in a wide range of applications and offers a host of adjustments to optimise control for each application.
    The drive has adjustable acceleration and deceleration ramps to produce smooth starts and stops,adjustable current limit protects motor against overcurrent and can also be used to provide an end-stop on current trip.
    The device has also two settable speeds, a useful feature for positioning applications.

    Control inputs are present for basic forward, backward and stop commands, as well as limit switch inputs to define end stops
    This device has also two settable speeds, this can be activated by dedicated input. The same input can be used for analogue speed control signal 0-5V
    Fault output can indicate current trip, over-current or zero-current conditions. It can also be pulled down to ground to disable the drive, if required
    C-version includes wo new parameter: freewheel options for release the rotor of motor, selectable pwm frequency (16kHz pwm being inaudible though current handling capacity is reduced)
    There are two selectable control modes, in continuous mode the motor runs as long as the control is active, in impulse mode it will operate from a momentary command
    Special settings are also available for start-up kick and auto reverse
    For parameters setting there are 3 options: EM-236 interface unit, EM-268 with Menthol-Lite PC-program and EM-326 with Menthol-App application for smartphone.

    Features and Benefits


    24-48Vdc, 7-10A continuous, 20-25A peak
    Speed, direction, current limiting, soft start/stop and auto-reverse control
    Limit switch inputs for end of travel
    Compact and DIN rail mountable

    Compact with high current output
    Current limit
    Zero current limit
    Overvoltage brake
    Speed setting
    Flexible control inputs
    Impulse / continuous mode
    DIN rail mountable
    Digital parameter - C-version replaces A and B versions
    C-firmware can be loaded B ver. card
    C.version available with Molex connector
    Current limit setting input ( new )
    Freewheel options ( new )
    * Continuous current output when ambient temp is <50°C
    12-24Vdc version drive =
    15A at 100% speed / 10A at 5-99% speed pwm=2kHz
    10A at 100% speed / 5A at 5-99% speed pwm=16kHz
    Peak ( 5s.) 30A at 2khz pwm and 25A at 16kHz pwm

    Small size
    High current output
    Current limit
    Zero current limit
    Overvoltage brake
    Speed setting
    Flexible control inputs
    Impulse / continuous mode
    Rail base mountable
    Digital parameter setting
    48V version of EM-241C
    Current limit setting input ( new )
    Freewheel options ( new )
    2 or 16kHz PWM freq. ( new )
    Prog ver C-v1.5
    Eight input logic option
    Overvoltage range increased
    Analog speed input range set


    規格

    屬性
    Supply Voltage20 → 60 V dc
    Current Rating10 A
    Voltage Rating24 → 48 V dc
    15 現貨庫存,可於6工作日發貨。
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    原價 TWD4,175.00

    您付款

    TWD3,758.00

    (不含稅)

    TWD3,945.90

    (含稅)

    單位Per unit
    1 +TWD3,758.00