Electromen OY DC Motor Controller, 10/35 V dc, 15 A, PWM Function

查看所有Motor Controllers

小計（1 件）*

TWD3,404.00

(不含稅)

TWD3,574.20

(含稅)

Add to Basket
選擇或輸入數量
暫時缺貨
  • 19 件從 2026年1月08日 起裝運發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD3,404.00

* 參考價格

RS庫存編號:
183-7330
製造零件編號:
EM-241C
製造商:
Electromen OY
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Electromen OY

Product Type

DC Motor Controller

Control Function

PWM

Supply Voltage

10/35 V dc

Output Voltage

12/24 V

Current Rating

15 A

Overall Length

42mm

Overall Width

72mm

Overall Depth

25 mm

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

60°C

Standards/Approvals

EN - 55022B

COO (Country of Origin):
FI

Electromen - EM-241C DC MOTOR CONTROLLER, 12-24 V DC, 15 A


The EM-241C is a full bridge brushed DC-motor starter.It is designed to work in a wide range of applications and offers a host of adjustments to optimise control for each application.The drive has adjustable acceleration and deceleration ramps to produce smooth starts and stops.Adjustable current limit protects motor against overcurrent and can also be used to provide an end-stop on current trip.

This device has also two settable speeds, a useful feature for positioning applications, control inputs are present for basic forward, backward and stop commands, as well as limit switch inputs to define end stops

This device has also two settable speeds, this can be activated by dedicated input. The same input can be used for analogue speed control signal 0-5V

Fault output can indicate current trip, over-current or zero-current conditions. It can also be pulled down to ground to disable the drive, if required

C-version includes wo new parameter: freewheel options for release the rotor of motor, selectable pwm frequency (16kHz pwm being inaudible though current handling capacity is reduced)

There are two selectable control modes, in continuous mode the motor runs as long as the control is active, in impulse mode it will operate from a momentary command

Special settings are also available for start-up kick and auto reverse

For parameters setting there are 3 options: EM-236 interface unit, EM-268 with EmenTool-Lite PC-program and EM-326 with EmenTool-App application for smartphone

Features and Benefits


12-24Vdc, 10-15A continuous, 25-30A peak

Speed, direction, current limiting, soft start/stop and auto-reverse control

Limit switch inputs for end of travel

Compact and DIN rail mountable;Compact with high current output

Current limit

Zero current limit

Overvoltage brake

Speed setting

Flexible control inputs

Impulse / continuous mode

DIN rail mountable

Digital parameter - C-version replaces A and B versions

C-firmware can be loaded B ver. card

C.version available with Molex connector

Current limit setting input (new)

Freewheel options (new)

2kHz / 16kHz PWM frequency (new)

* Continuous current output when ambient temp is <50°C

12-24Vdc version drive =

15A at 100% speed / 10A at 5-99% speed PWM=2kHz

10A at 100% speed / 5A at 5-99% speed PWM=16kHz

Peak ( 5s.) 30A at 2kHz PWM and 25A at 16kHz PWM

相關連結