Vishay IRF820 Type N-Channel Power MOSFET, 2.5 A, 500 V Enhancement, 3-Pin TO-220AB IRF820PBF
- RS庫存編號:
- 178-0851
- 製造零件編號:
- IRF820PBF
- 製造商:
- Vishay
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 管，共 50 件）*
TWD1,720.00
(不含稅)
TWD1,806.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 400 件從 2026年8月10日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每管* |
|---|---|---|
| 50 - 200 | TWD34.40 | TWD1,720.00 |
| 250 + | TWD30.90 | TWD1,545.00 |
* 參考價格
- RS庫存編號:
- 178-0851
- 製造零件編號:
- IRF820PBF
- 製造商:
- Vishay
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Vishay | |
| Channel Type | Type N | |
| Product Type | Power MOSFET | |
| Maximum Continuous Drain Current Id | 2.5A | |
| Maximum Drain Source Voltage Vds | 500V | |
| Package Type | TO-220AB | |
| Series | IRF820 | |
| Mount Type | Through Hole | |
| Pin Count | 3 | |
| Maximum Drain Source Resistance Rds | 3Ω | |
| Channel Mode | Enhancement | |
| Typical Gate Charge Qg @ Vgs | 24nC | |
| Maximum Gate Source Voltage Vgs | 20V | |
| Maximum Power Dissipation Pd | 50W | |
| Minimum Operating Temperature | -55°C | |
| Forward Voltage Vf | 1.6V | |
| Maximum Operating Temperature | 150°C | |
| Width | 4.7mm | |
| Standards/Approvals | RoHS | |
| Length | 10.41mm | |
| Height | 9.01mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Vishay | ||
Channel Type Type N | ||
Product Type Power MOSFET | ||
Maximum Continuous Drain Current Id 2.5A | ||
Maximum Drain Source Voltage Vds 500V | ||
Package Type TO-220AB | ||
Series IRF820 | ||
Mount Type Through Hole | ||
Pin Count 3 | ||
Maximum Drain Source Resistance Rds 3Ω | ||
Channel Mode Enhancement | ||
Typical Gate Charge Qg @ Vgs 24nC | ||
Maximum Gate Source Voltage Vgs 20V | ||
Maximum Power Dissipation Pd 50W | ||
Minimum Operating Temperature -55°C | ||
Forward Voltage Vf 1.6V | ||
Maximum Operating Temperature 150°C | ||
Width 4.7mm | ||
Standards/Approvals RoHS | ||
Length 10.41mm | ||
Height 9.01mm | ||
Automotive Standard No | ||
Vishay IRF820 Series Power MOSFET, 500V Drain-Source Voltage, 50W Power Dissipation - IRF820PBF
This power MOSFET is a high-voltage switching transistor designed for through-hole mounting in power conversion and control circuits. It operates as an N-channel enhancement device intended to switch or amplify high-voltage loads within electronic systems while meeting RoHS requirements.
Features and Benefits:
• 500V drain-source rating enables high-voltage switching capability
• 50W power dissipation supports sustained power handling
• 2.5A continuous drain current allows moderate load conduction
• 3Ω maximum RDS(on) reduces conduction losses under light loads
• 24nC typical gate charge permits reasonable switching speed control
• -55°C to 150°C operating range suits wide thermal environments
• 50W power dissipation supports sustained power handling
• 2.5A continuous drain current allows moderate load conduction
• 3Ω maximum RDS(on) reduces conduction losses under light loads
• 24nC typical gate charge permits reasonable switching speed control
• -55°C to 150°C operating range suits wide thermal environments
Applications
• Suitable for SMPS primary-side switching stages
• Ideal for high-voltage lamp and heater controllers
• Used with discrete motor-drive front-ends for low-current motors
• Can be used for hobbyist high-voltage power supplies
• Used for laboratory bench test rigs requiring rugged through-hole parts
• Ideal for high-voltage lamp and heater controllers
• Used with discrete motor-drive front-ends for low-current motors
• Can be used for hobbyist high-voltage power supplies
• Used for laboratory bench test rigs requiring rugged through-hole parts
What package and mounting method does it use?
The device is supplied in a TO-220AB package configured for through-hole fitting with three pins for straightforward PCB attachment and heatsinking.
What gate voltage limits must be observed to avoid damage?
The gate-source voltage must not exceed 20V in either polarity to prevent gate-oxide stress and potential failure.
How does the forward voltage specification affect its use in circuits?
The specified forward voltage of 1.6V indicates the typical voltage drop when conducting under specified test conditions and should be accounted for in thermal and efficiency calculations.
Is this component suitable for automotive temperature extremes?
While it tolerates -55°C to 150°C, it is not designated to meet automotive-standard qualifications.
相關連結
- Vishay IRF Type N-Channel MOSFET 500 V Enhancement, 3-Pin TO-220
- Vishay IRF Type N-Channel MOSFET 500 V Enhancement, 3-Pin TO-220 IRF820APBF
- Vishay IRF Type N-Channel MOSFET 400 V Enhancement, 3-Pin TO-220
- Vishay IRF Type N-Channel MOSFET 200 V Enhancement, 3-Pin TO-220
- Vishay IRF Type N-Channel MOSFET 400 V Enhancement, 3-Pin TO-220
- Vishay IRF Type N-Channel MOSFET 100 V Enhancement, 3-Pin TO-220
- Vishay IRF Type N-Channel MOSFET 100 V Enhancement, 3-Pin TO-220
- Vishay IRF Type N-Channel MOSFET 100 V Enhancement, 3-Pin TO-220