ABB SMISSLINE TP S400M Miniature Circuit Breaker, 2-Pole, 10A, Type K, 240V AC, 10 kA Breaking Capacity

RS庫存編號:: 246-2586
製造零件編號:: 2CCS572001R0427
製造商:: ABB

ABB SMISSLINE TP S400M Miniature Circuit Breaker, 2-Pole, 10A, Type K, 240V AC, 10 kA Breaking Capacity

查看所有MCBs

小計（1 件）*

TWD4,140.00

(不含稅)

TWD4,347.00

(含稅)

訂單超過 $1,300.00 免費送貨

有庫存

加上 1 件從 2026年11月09日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD4,140.00

* 參考價格

RS庫存編號:: 246-2586
製造零件編號:: 2CCS572001R0427
製造商:: ABB

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	ABB
	Number of Poles	2
	Product Type	Miniature Circuit Breaker
	Current Rating	10A
	Tripping Characteristics	Type K
	Rated AC Voltage	240V
	Breaking Capacity	10kA
	Range	SMISSLINE TP
	Series	S400M
	Terminal Type	Screw
	IP Rating	IP20
	Height	91mm
	Width	36mm
	Standards/Approvals	IEC/EN 60947-2
	Depth	75mm
	Reset Actuator Type	I/O Actuator
	Tripping Mechanism	Electromechanic, Thermal

	選取全部
	品牌 ABB
	Number of Poles 2
	Product Type Miniature Circuit Breaker
	Current Rating 10A
	Tripping Characteristics Type K
	Rated AC Voltage 240V
	Breaking Capacity 10kA
	Range SMISSLINE TP
	Series S400M
	Terminal Type Screw
	IP Rating IP20
	Height 91mm
	Width 36mm
	Standards/Approvals IEC/EN 60947-2
	Depth 75mm
	Reset Actuator Type I/O Actuator
	Tripping Mechanism Electromechanic, Thermal

COO (Country of Origin):: CH

ABB S400M Series Miniature Circuit Breaker, 10A Current, 240V Rated AC Voltage - 2CCS572001R0427

This miniature circuit breaker provides overcurrent protection for low-voltage installations, combining thermal and electromechanical trip actions to interrupt fault currents. Designed for panel or distribution board use, it conforms to recognised switching device standards and is intended for environments where Compact protective devices are required.

Features and Benefits:

• 10A rating delivers controlled protection for light circuits
• 10kA breaking capacity limits fault energy during short circuits
• Type K tripping provides defined selective response to inrushes
• Screw terminals enable secure conductor clamping under vibration
• Reset I/O actuator allows clear manual on/off operation

Applications

• Suitable for protecting lighting circuits in commercial premises
• Ideal for motor feeder protection with moderate inrush currents
• Used with dual-pole isolation requirements in distribution boards
• Can be used for control circuits requiring manual reset action

What tripping mechanisms are combined to detect faults?

It employs a thermal element for overloads and an electromechanical release for short-circuit disconnection.

Which enclosure ingress level applies to panel use?

The protection rating corresponds to IP20, suitable for installation inside enclosures or distribution panels.

How is pole configuration arranged for load interruption?

Two poles are provided to simultaneously switch both conductors in single-phase systems.

What physical footprint considerations affect mounting density?

The unit is designed with a 36mm width to enable Compact arrangement on standard mounting rails.