Honeywell Technologies Roller Lever Limit Switch, SPDT, IP66, IP67, Die Cast Zinc Epoxy Coated Housing, 600V ac, 10A

RS庫存編號:: 217-7140
Distrelec 貨號:: 301-38-807
製造零件編號:: LSYAC1E
製造商:: Honeywell Technologies

Honeywell Technologies Roller Lever Limit Switch, SPDT, IP66, IP67, Die Cast Zinc Epoxy Coated Housing, 600V ac, 10A

小計（1 件）*

TWD14,515.00

(不含稅)

TWD15,240.75

訂單超過 $1,300.00 免費送貨

有庫存

6 件準備從其他地點送貨
加上 18 件從 2026年11月09日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD14,515.00

* 參考價格

RS庫存編號:: 217-7140
Distrelec 貨號:: 301-38-807
製造零件編號:: LSYAC1E
製造商:: Honeywell Technologies

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Honeywell Technologies
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	Contact Configuration	SPDT
	IP Rating	IP66, IP67
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Switching Current	10A
	Terminal Type	Screw
	Switching AC Voltage	600V ac
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	80°C
	Standards/Approvals	RoHS
	Depth	39mm
	Length	110mm
	Width	36mm
	Hazardous Area Certification	No
	Mechanical Life	50000000Cycles
	Conduit Entry	20 mm
	Mounting Orientation	Side

	選取全部
	品牌 Honeywell Technologies
	Product Type Limit Switch
	Actuator Type Roller Lever
	Contact Configuration SPDT
	IP Rating IP66, IP67
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Switching Current 10A
	Terminal Type Screw
	Switching AC Voltage 600V ac
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 80°C
	Standards/Approvals RoHS
	Depth 39mm
	Length 110mm
	Width 36mm
	Hazardous Area Certification No
	Mechanical Life 50000000Cycles
	Conduit Entry 20 mm
	Mounting Orientation Side

Honeywell Limit Switch, Roller Lever Actuator, 20mm Conduit Entry - LSYAC1E

This limit switch provides mechanical position sensing for industrial automation and electrical control systems, using a roller lever actuator to detect and interrupt motion in machinery and equipment. It is housed in a robust die-cast zinc enclosure designed for side mounting and features a single-pole, double-throw snap-action contact arrangement suited to control and signalling tasks.

Features and Benefits:

• Snap-action contacts deliver Rapid switching at load currents up to 10 A
• Rated for switching up to 600V AC to handle mains-level circuits
• IP66 and IP67 protection enables use in wet and dusty environments
• Mechanical endurance rated to 10 million cycles for long service life
• Screw terminals offer secure connections compatible with field wiring
• Operates across temperatures from -10 °C to 80 °C for varied conditions

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for door and guard interlocks in automated cells
• Used with motor starters for limit-based shutdown functions
• Can be used for position feedback on material-handling equipment

What conduit provision does it offer for wiring entry?

It accepts a 20mm conduit entry to integrate with standard industrial trunking and conduit fittings.

How is the switch mounted and oriented?

It is intended for side mounting to allow the roller lever to be positioned for lateral actuation.

What materials are used for the enclosure to withstand workshop conditions?

The body is formed from die-cast zinc to provide a Durable metallic enclosure resistant to impact and mechanical wear.

Which contact configuration is provided and what does that enable?

It uses an SPDT arrangement so a single actuator movement can change between normally closed and normally open circuits.