Fluke 1625 Earth Tester Kit CAT II 300V

RS庫存編號:: 798-3974
Distrelec 貨號:: 110-79-081
製造零件編號:: FLUKE-1625-2 KIT
製造商:: Fluke

小計（1 件）*

TWD205,082.00

(不含稅)

TWD215,336.10

訂單超過 $1,300.00 免費送貨

有限的庫存

5 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD205,082.00

* 參考價格

RS庫存編號:: 798-3974
Distrelec 貨號:: 110-79-081
製造零件編號:: FLUKE-1625-2 KIT
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Product Type	Earth Tester Kit
	Accuracy	±7 % + 2 Digits
	Display Type	LCD
	Measurement Type	Earth Resistance
	Battery Life	6000h
	Battery Type	AA
	Power Source	Battery
	Weight	1.1kg
	Height	133mm
	Includes	Cable Reel, User Manual, Batteries, Carrying Case
	Length	250mm
	Maximum Operating Temperature	35°C
	Standards/Approvals	No
	Safety Category Voltage	300V
	Safety Category Level	CAT II
	Width	187mm
	Model Number	1625
	Minimum Operating Temperature	0°C

	選取全部
	品牌 Fluke
	Product Type Earth Tester Kit
	Accuracy ±7 % + 2 Digits
	Display Type LCD
	Measurement Type Earth Resistance
	Battery Life 6000h
	Battery Type AA
	Power Source Battery
	Weight 1.1kg
	Height 133mm
	Includes Cable Reel, User Manual, Batteries, Carrying Case
	Length 250mm
	Maximum Operating Temperature 35°C
	Standards/Approvals No
	Safety Category Voltage 300V
	Safety Category Level CAT II
	Width 187mm
	Model Number 1625
	Minimum Operating Temperature 0°C

豁免

COO (Country of Origin):: RO

Fluke Earth Tester Kit, ±5 % rdg Accuracy, Battery Life 6000h - FLUKE-1625-2 KIT

This earth tester kit is a battery‑powered instrument for measuring earth resistance and soil resistivity in outdoor and indoor environments. It supports multiple test methods including fall‑of‑potential, selective clamp testing and stakeless clamp‑based loop measurements, and stores test records for later transfer via USB.

Features & Benefits

• ±5% accuracy Plus 5 digits for precise readings
• AFC and R* modes reduce interference and reflect 55Hz impedance
• Internal memory holds up to 1500 records for data logging
• Stakeless measurement with two clamps avoids stake placement
• IP56 protection permits use in wet and dusty conditions
• Battery operation delivers up to 6000 h life with AA cells

Applications

• Suitable for field service fault‑to‑earth verification in power systems
• Ideal for industrial maintenance earth resistance surveys
• Used for soil earth resistance measurement in telecom sites
• Can be used for selective rod testing without disconnection
• Used with clamps for loop resistance checks inside substations

How is data transferred from the instrument for reporting?

Stored records are exported through a USB port for PC download and analysis.

What safety and electrical limits should I observe during testing?

Measurement is inhibited if external voltages exceed 24V and the instrument withstands misuse up to 250 Vrms between sockets.

Which battery configuration is required and what is typical lifespan?

Six AA alkaline cells power the unit with typical measurement counts up to 6000 h depending on load conditions.

How does the instrument handle noisy environments or mains interference?

Noise rejection is specified up to 120 dB and automatic frequency selection identifies interference and selects a measurement frequency.

Are there restrictions on clamp use for stakeless testing?

Stakeless loop measurement requires the recommended current clamps and adherence to minimum spacing for valid results.

Supplied with

6 x AA LR6 batteries, 6 x test leads, 4 x earth ground stakes, 3 x cable reels with wire (2 x 25 m, 1 x 50 m), 2 x clamps (one inducing, one sensing), users manual, carrying case.