Fluke T90, Digital Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT II, CAT III, FLUKE T90

RS庫存編號:: 750-8438
Distrelec 貨號:: 304-11-288
製造零件編號:: FLUKE T90
製造商:: Fluke

Fluke T90, Digital Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT II, CAT III, FLUKE T90

小計（1 件）*

TWD3,900.00

(不含稅)

TWD4,095.00

訂單超過 $1,300.00 免費送貨

有限的庫存

296 件準備從其他地點送貨
加上 39 件從 2026年5月14日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD3,900.00

* 參考價格

RS庫存編號:: 750-8438
Distrelec 貨號:: 304-11-288
製造零件編號:: FLUKE T90
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Product Type	Voltage Tester
	Continuity Check	Yes
	Display Type	Digital
	RCD Trip Test	Yes
	IP Rating	IP54
	Battery Type	AAA
	Power Source	Battery
	Weight	180g
	Minimum Operating Temperature	-15°C
	Maximum Operating Temperature	45°C
	Maximum Voltage	690V ac/dc
	Hazardous Area Certification	No
	Standards/Approvals	No
	Width	65mm
	Height	38mm
	Length	230mm
	Model Number	T90
	Safety Category Voltage	690, 600V
	Safety Category Level	CAT II, CAT III

	選取全部
	品牌 Fluke
	Product Type Voltage Tester
	Continuity Check Yes
	Display Type Digital
	RCD Trip Test Yes
	IP Rating IP54
	Battery Type AAA
	Power Source Battery
	Weight 180g
	Minimum Operating Temperature -15°C
	Maximum Operating Temperature 45°C
	Maximum Voltage 690V ac/dc
	Hazardous Area Certification No
	Standards/Approvals No
	Width 65mm
	Height 38mm
	Length 230mm
	Model Number T90
	Safety Category Voltage 690, 600V
	Safety Category Level CAT II, CAT III

不適用

Fluke Voltage Tester, 690V Maximum Voltage, IP54 - FLUKE T90

This handheld voltage tester is a two-pole instrument designed to verify presence or absence of voltage and to check continuity in industrial and commercial electrical systems. It operates across low to high mains levels and is powered by AAA batteries, delivering straightforward indications via backlit LEDs and audible signals to support routine troubleshooting in automation, electronics and mechanical environments.

Features & Benefits

• Measures up to 690V AC/DC for high-voltage verification
• Continuity check with audible indication for quick circuit confirmation
• RCD trip test function for on-site residual-current device verification
• IP54-rated protection for use in dusty and splash-prone locations
• Dual-insulated lead tested to extended bend cycles for durability
• Low-battery indicator to prevent inaccurate readings during use

Applications

• Suitable for verifying live conductors on distribution boards
• Ideal for checking continuity in control panels and wiring looms
• Used for on-site RCD testing during safety maintenance
• Can be used for phase detection with single-pole testing
• Used with field service and commissioning tasks in factories

What power source does it require and how does that affect field use?

It runs on AAA batteries which permit Compact handheld operation and straightforward battery replacement on site.

How does the tester perform under elevated ambient temperatures?

It is rated to operate up to 45°C, allowing use in warmer plant rooms and engine bays without derating.

Which safety categories cover common electrical distribution work?

It meets CAT II and CAT III classifications applicable to equipment testing on domestic and industrial installations up to specified voltages.

How heavy and portable is the unit for daily site carry?

The instrument weighs 180 g, enabling easy pocket or pouch carry for technicians.