Digilent 410-299 Programming Cable for use with Xilinx Tool, JTAG-HS3
- RS庫存編號:
- 134-6435
- Distrelec 貨號:
- 300-44-265
- 製造零件編號:
- 410-299
- 製造商:
- Digilent
可享批量折扣
小計（1 件）*
TWD1,906.00
(不含稅)
TWD2,001.30
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 41 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD1,906.00 |
| 5 + | TWD1,849.00 |
* 參考價格
- RS庫存編號:
- 134-6435
- Distrelec 貨號:
- 300-44-265
- 製造零件編號:
- 410-299
- 製造商:
- Digilent
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Digilent | |
| Product Type | Development Kit Accessory | |
| Accessory Type | Programming Cable | |
| For Use With | Xilinx Tool, JTAG-HS3 | |
| Standards/Approvals | No | |
| Distrelec Product Id | 30044265 | |
| 選取全部 | ||
|---|---|---|
品牌 Digilent | ||
Product Type Development Kit Accessory | ||
Accessory Type Programming Cable | ||
For Use With Xilinx Tool, JTAG-HS3 | ||
Standards/Approvals No | ||
Distrelec Product Id 30044265 | ||
JTAG-HS3 FPGA Programming Cable
The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC.
Features
• Separate Vref drives JTAG signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG bus at up to 30Mbit/sec
• Compatible with Xilinx ISE 14.1 and newer
• Compatible with Xilinx Vivado 2013.3 and newer
• PC connector: MicroUSB
• JTAG connector: 2 x 7-pin 2mm
• Open-drain buffer on pin 14 allows processor reset of Xilinx Zynq platform
Supported Target Devices
• Xilinx FPGAs;• Xilinx Zynq-7000;• Xilinx CoolRunner™/CoolRunner-II CPLDs;• Xilinx Platform Flash ISP configuration PROMs;• Selected third-party SPI PROMs;• Selected third-party BPI PROMs
Target Devices Not Supported
• Xilinx 9500/9500XL CPLDs;• Xilinx 1700 and 18V00 ISP configuration PROMs;• Xilinx FPGA eFUSE programming
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
Note
This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
Supplied with
USB cable
相關連結
- Digilent 410-249 Programming Adapter for use with Xilinx FPGAs
- Digilent 410-376 Xilinx Spartan-7 Development Board
- Digilent 410-308 Programming Module for use with FPGA Devices
- Digilent 410-251 Programming Module for use with FPGA Devices
- Digilent 410-352 Xilinx Spartan-7 Development Board for Hobbyists XC7S25-CSGA324
- Digilent 410-383-5EV Zynq Ultrascale+ MPSoC Development Board Development Board Xilinx Zynq UltraScale+ MPSoC EV Device
- Digilent 471-036-1 Digilent Eclypse Z7 + two Zmod ADC Expansion Module Xilinx Zynq®-7000 SoC Family Device for Xilinx
- Digilent 471-036-2 Digilent Eclypse Z7 + two Zmod DAC Expansion Module Xilinx Zynq®-7000 SoC Family Device for Xilinx