Energizer SR60 Button Battery, 1.55 V, 6.8 mm Diameter

小計(1 包,共 10 件)*

TWD378.00

(不含稅)

TWD396.90

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 88 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
包
每包
每單位*
1 +TWD378.00TWD37.80

* 參考價格

RS庫存編號:
683-369
製造零件編號:
7638900107753
製造商:
Energizer
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Energizer

Battery Size

SR60

Product Type

Button Battery

Chemistry

Silver Oxide

Nominal Voltage

1.55V

Battery Capacity

19mAh

Diameter

6.8mm

Termination Type

Flat Contact

Height

2.15mm

Weight

370mg

Standards/Approvals

ANSI-1175SO, IEC-SR60

Series

364/363

IEC Code

SR60

豁免

COO (Country of Origin):
JP

Energizer 364/363 Series Button Battery, 1.55V Nominal Voltage, 19mAh Capacity - 7638900107753


This button battery is a silver oxide coin cell designed to deliver a steady 1.55V supply for low continuous drains and intermittent high pulses in Compact devices. It operates at typical room temperature conditions and is intended for applications requiring a small, high-energy-density power source with flat-contact termination.

Features and Benefits:


• 1.55V nominal voltage provides stable output for precision electronics
• 19mAh capacity supports long service under light continuous loads
• 10-20Ω impedance enables Rapid response to brief high-current demands
• Flat contact termination ensures secure electrical connection in holders
• Gel anode chemistry reduces self-discharge for extended shelf life

Applications


• Suitable for powering wrist instruments requiring Compact cells
• Used with hearing accessories needing low continuous drain
• Ideal for small medical devices with intermittent high pulses
• Can be used for calculators and miniature sensors
• Used for replacement of watch cells where flat TOP is required

What capacity is reached under standard test conditions?


Typical capacity measures 19mAh when discharged to 1.2V under a continuous 68kΩ load at 21°C.

How does temperature affect usable service?


Service varies with temperature, performance curves show reduced percentage service at lower temperatures and increased service at higher temperatures relative to 21°C.

What is the typical weight and volume of the cell?


The cell weighs about 0.37g and occupies approximately 0.08cm3.

At what voltage is the load cut-off specified?


The load cut-off is defined at 1.2V for end-of-discharge measurement.

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。