Energizer SR59 Button Battery, 1.55 V, 7.9 mm Diameter

RS庫存編號:: 683-372
製造零件編號:: 7638900252972
製造商:: Energizer

Energizer SR59 Button Battery, 1.55 V, 7.9 mm Diameter

小計（1 包，共 10 件）*

TWD651.00

(不含稅)

TWD683.55

訂單超過 $1,300.00 免費送貨

有庫存

181 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

包	每包	每單位*
1 +	TWD651.00	TWD65.10

* 參考價格

RS庫存編號:: 683-372
製造零件編號:: 7638900252972
製造商:: Energizer

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Energizer
	Battery Size	SR59
	Product Type	Button Battery
	Chemistry	Silver Oxide
	Nominal Voltage	1.55V
	Battery Capacity	34mAh
	Diameter	7.9mm
	Termination Type	Flat Contact
	Weight	500mg
	Standards/Approvals	No
	Height	2.6mm
	IEC Code	SR59

	選取全部
	品牌 Energizer
	Battery Size SR59
	Product Type Button Battery
	Chemistry Silver Oxide
	Nominal Voltage 1.55V
	Battery Capacity 34mAh
	Diameter 7.9mm
	Termination Type Flat Contact
	Weight 500mg
	Standards/Approvals No
	Height 2.6mm
	IEC Code SR59

Datasheet - 397

豁免

COO (Country of Origin):: JP

Energizer Button Battery, 1.55V Nominal Voltage, 34mAh Capacity - 7638900252972

This button battery provides a Compact silver oxide power source for low-drain devices, delivering a stable 1.55V nominal voltage and formulated for continuous, low-current operation. It is designed for small electronics where consistent voltage and minimal size are required, functioning reliably across normal ambient temperatures.

Features and Benefits:

• 34mAh capacity supports extended low-drain operation
• 1.55V nominal voltage preserves device voltage stability
• Silver oxide chemistry offers stable output under light loads
• Low impedance of 15-30ohm improves Pulse response
• 0.5g mass minimises weight impact in miniature devices

Applications

• Suitable for wristwatch power requirements
• Used with small medical monitoring devices
• Ideal for calculators and handheld instruments
• Can be used for small sensors and measurement tools

What continuous drain was used to determine capacity?

Capacity was measured at a continuous 33Kohm drain and specified to 1.2V.

How is end-of-life voltage defined for this cell?

The load cut-off for service is set at 1.2V.

What impedance should designers expect at audio-frequency testing?

Impedance at 40Hz ranges between 15ohm and 30ohm.

How long does the cell run under the test drain at 21°C?

At 33Kohm continuous drain the documented run time is approximately 718 hours.