Energizer SR43 Button Battery, 1.55 V, 11.6 mm Diameter
- RS庫存編號:
- 683-373
- 製造零件編號:
- 7638900253030
- 製造商:
- Energizer
小計(1 包,共 10 件)*
TWD1,059.00
(不含稅)
TWD1,111.95
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 136 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
包 | 每包 | 每單位* |
|---|---|---|
| 1 + | TWD1,059.00 | TWD105.90 |
* 參考價格
- RS庫存編號:
- 683-373
- 製造零件編號:
- 7638900253030
- 製造商:
- Energizer
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Energizer | |
| Battery Size | SR43 | |
| Product Type | Button Battery | |
| Chemistry | Silver Oxide | |
| Nominal Voltage | 1.55V | |
| Battery Capacity | 110mAh | |
| Diameter | 11.6mm | |
| NEDA Code | 1133SO | |
| Termination Type | Flat Contact | |
| Height | 4.2mm | |
| Weight | 1.7g | |
| Standards/Approvals | No | |
| IEC Code | SR43 | |
| 選取全部 | ||
|---|---|---|
品牌 Energizer | ||
Battery Size SR43 | ||
Product Type Button Battery | ||
Chemistry Silver Oxide | ||
Nominal Voltage 1.55V | ||
Battery Capacity 110mAh | ||
Diameter 11.6mm | ||
NEDA Code 1133SO | ||
Termination Type Flat Contact | ||
Height 4.2mm | ||
Weight 1.7g | ||
Standards/Approvals No | ||
IEC Code SR43 | ||
豁免
- COO (Country of Origin):
- JP
Energizer Button Battery, 1.55V Nominal Voltage, 110mAh Battery Capacity - 7638900253030
This button battery provides a Compact silver oxide power source for low-drain electronics, delivering a stable 1.55V output suitable for devices requiring continuous, long-duration service and occasional high-current pulses. It employs a silver oxide chemical system and flat-contact termination for consistent connection in small consumer equipment.
Features and Benefits:
• 110mAh typical capacity supports extended low-drain operation
• 5-15ohm impedance at 40Hz enables dependable Pulse response
• 1.2V cut-off preserves usable energy during discharge
• Gel anode construction maintains consistent voltage under load
• Flat contact termination ensures secure electrical contact
• 5-15ohm impedance at 40Hz enables dependable Pulse response
• 1.2V cut-off preserves usable energy during discharge
• Gel anode construction maintains consistent voltage under load
• Flat contact termination ensures secure electrical contact
Applications
• Suitable for wristwatches requiring flat-contact cells
• Used with handheld calculators requiring steady low current
• Ideal for small measuring instruments with intermittent pulses
• Can be used for Compact medical monitoring devices
• Used for toys and key fobs needing long shelf life
• Used with handheld calculators requiring steady low current
• Ideal for small measuring instruments with intermittent pulses
• Can be used for Compact medical monitoring devices
• Used for toys and key fobs needing long shelf life
What is the typical mass and how does it affect device balance?
The cell weighs 1.7g, a negligible mass that minimises impact on Compact device balance.
How is capacity measured and under what conditions?
Capacity is specified as 110mAh to 1.2V using a continuous 6.8kΩ drain at 21°C.
What temperature behaviour should be expected during storage?
Performance varies with storage temperature, with progressive service reduction observable over years at elevated temperatures.
What form factor considerations affect replacement compatibility?
The cell uses a coin-shaped format with a low-profile flat contact suitable for tight battery compartments.
How does internal impedance influence Pulse performance?
An impedance of 5-15ohm at 40Hz limits voltage drop during brief high-current demands, supporting short pulses on demand.
相關連結
- Energizer Button Battery 11.6 mm Diameter
- Energizer SR44 Button Battery 11.6 mm Diameter
- Energizer Button Battery 7.9 mm Diameter
- Energizer Button Battery 9.5 mm Diameter
- Energizer Button Battery 6.8 mm Diameter
- Energizer SR66 Button Battery 6.8 mm Diameter
- Energizer SR41 Button Battery 7.9 mm Diameter
- Energizer 321 Button Battery 6.8 mm Diameter
