FTDI Chip, Transceiver IC, 28-Channel 1 Mbps, 5.25 V, USB 2.0, 3.3 V, 28-Pin SSOP-28
- RS庫存編號:
- 257-5456
- 製造零件編號:
- FT245RNL-TUBE
- 製造商:
- FTDI Chip
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
小計(1 管,共 47 件)*
TWD6,603.50
(不含稅)
TWD6,933.44
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 1,128 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每管* |
|---|---|---|
| 47 - 47 | TWD140.50 | TWD6,603.50 |
| 94 - 188 | TWD136.30 | TWD6,406.10 |
| 235 + | TWD132.20 | TWD6,213.40 |
* 參考價格
- RS庫存編號:
- 257-5456
- 製造零件編號:
- FT245RNL-TUBE
- 製造商:
- FTDI Chip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FTDI Chip | |
| Number of Transceivers | 28 | |
| Product Type | Transceiver IC | |
| Maximum Data Rate | 1Mbps | |
| USB Specification | USB 2.0 | |
| Sub Type | USB to parallel FIFO Interface | |
| Power Supply Type | Single | |
| ESD Protection | No | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 5.25V | |
| Mount Type | Surface | |
| Package Type | SSOP-28 | |
| Pin Count | 28 | |
| Supported Protocols | USB 2.0 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 5.3 mm | |
| Standards/Approvals | RoHS | |
| Height | 1.75mm | |
| Length | 10.2mm | |
| Series | FT245RNL-TUBE | |
| Supply Current | 15mA | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 FTDI Chip | ||
Number of Transceivers 28 | ||
Product Type Transceiver IC | ||
Maximum Data Rate 1Mbps | ||
USB Specification USB 2.0 | ||
Sub Type USB to parallel FIFO Interface | ||
Power Supply Type Single | ||
ESD Protection No | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 5.25V | ||
Mount Type Surface | ||
Package Type SSOP-28 | ||
Pin Count 28 | ||
Supported Protocols USB 2.0 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 5.3 mm | ||
Standards/Approvals RoHS | ||
Height 1.75mm | ||
Length 10.2mm | ||
Series FT245RNL-TUBE | ||
Supply Current 15mA | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
The FTDI Chip has FT245RNL which is a USB to parallel FIFO interface, with the new FTDIChip-ID security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available.
Entire USB protocol handled on the chip – No USB-specific firmware programming required
Simple interface to MCU / PLD / FPGA logic with simple 4-wire handshake interface
相關連結
- FTDI Chip FT245RNL-TUBE 28-Channel USB 2.0
- FTDI Chip FT245RNQ-TRAY 28-Channel USB 2.0
- FTDI Chip FT260S-U USB 2.0 28-Pin TSSOP
- FTDI Chip FT232RNQ-TRAY 28-Channel USB 2.0
- FTDI Chip FT232RNL-TUBE 28-Channel USB 2.0
- FTDI Chip FT120T-R USB 1.1 3.3 to 5 V, 28-Pin TSSOP
- FTDI Chip FT231XQ-T USB 2.0 20-Pin QFN
- FTDI Chip FT2232HL-TRAY USB 2.0 64-Pin LQFP
