FTDI Chip Multiprotocol Transceiver 28-Pin SSOP, FT232RL-REEL
- RS庫存編號:
- 406-580
- 製造零件編號:
- FT232RL-REEL
- 製造商:
- FTDI Chip
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
替代產品
該產品我們目前不提供。 這是我們推薦的替代產品。
個
TWD155.00
(不含稅)
TWD162.75
(含稅)
- RS庫存編號:
- 406-580
- 製造零件編號:
- FT232RL-REEL
- 製造商:
- FTDI Chip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FTDI Chip | |
| Maximum Data Rate | 3MBd | |
| Number of Transmitters | 1 | |
| Product Type | Multiprotocol Transceiver | |
| Number of Receivers | 1 | |
| Number of Transceivers | 1 | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 5.25V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Interface Standards | UART | |
| Standards/Approvals | No | |
| Power Supply Type | Single | |
| Height | 1.75mm | |
| Length | 10.2mm | |
| Width | 5.3 mm | |
| Supply Current | 15mA | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 FTDI Chip | ||
Maximum Data Rate 3MBd | ||
Number of Transmitters 1 | ||
Product Type Multiprotocol Transceiver | ||
Number of Receivers 1 | ||
Number of Transceivers 1 | ||
Mount Type Surface | ||
Package Type SSOP | ||
Pin Count 28 | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 5.25V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Interface Standards UART | ||
Standards/Approvals No | ||
Power Supply Type Single | ||
Height 1.75mm | ||
Length 10.2mm | ||
Width 5.3 mm | ||
Supply Current 15mA | ||
Automotive Standard No | ||
FT232R - USB to Serial UART with Clock Generator, FTDI Chip
The FTDI Chip FT232R is a USB to serial UART Interface with optional clock generator output. Asynchronous and synchronous bit bang Interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.
A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com
The FT232R is available in Compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.
Features & Benefits
• Single chip USB to asynchronous serial data transfer interface.
• Entire USB protocol handled on the chip. No USB-specific firmware programming required.
• Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration.
• Fully integrated USB termination resistors.
• Fully integrated clock generation with no external crystal required Plus optional clock output
• Data transfer rates from 300 Baud to 3 MBaud (RS422, RS485, RS232) at TTL levels.
• 128 B receive buffer and 256 B transmit buffer utilising buffer smoothing technology to allow for high data throughput
Applications
USB Industrial Control
USB bar code readers
USB Digital Camera Interface
USB wireless modems
PDA to USB Transfers
USB Card readers
USB FLASH card readers and writers
USB Audio and low bandwidth video data transfer
相關連結
- FTDI Chip Multiprotocol Transceiver 48-Pin LQFP, FT232HL-REEL
- FTDI Chip Multiprotocol Transceiver 48-Pin QFN, FT232HQ-REEL
- FTDI Chip Multiprotocol Transceiver 16-Pin SSOP, FT230XS-U
- FTDI Chip Multiprotocol Transceiver, FT231XQ-R
- FTDI Chip FT245RL-REEL 28-Pin SSOP
- FTDI Chip Multiprotocol Transceiver 48-Pin LQFP, FT232HL-TRAY
- FTDI Chip Multiprotocol Transceiver 16-Pin QFN, FT230XQ-T
- FTDI Chip FT232RL Development Board UM232R