Nexperia PCMF3USB3SZ 2-Element Uni-Directional ESD Protection Diode, 15-Pin WLCSP
- RS庫存編號:
- 153-1916
- 製造零件編號:
- PCMF3USB3SZ
- 製造商:
- Nexperia
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 5 件）*
TWD175.00
(不含稅)
TWD183.75
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年11月04日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 5 - 1120 | TWD35.00 | TWD175.00 |
| 1125 - 2245 | TWD34.20 | TWD171.00 |
| 2250 + | TWD33.40 | TWD167.00 |
* 參考價格
- RS庫存編號:
- 153-1916
- 製造零件編號:
- PCMF3USB3SZ
- 製造商:
- Nexperia
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Nexperia | |
| Direction Type | Uni-Directional | |
| Product Type | ESD Protection Diode | |
| Diode Configuration | Complex Array | |
| Minimum Breakdown Voltage Vbr | 4.5V | |
| Mount Type | Surface Mount | |
| Package Type | WLCSP | |
| Maximum Reverse Stand-off Voltage Vwm | 5V | |
| Pin Count | 15 | |
| Maximum Peak Pulse Current Ippm | 4A | |
| Clamping Voltage VC | 6.5V | |
| ESD Protection | Yes | |
| Test Current It | 50mA | |
| Minimum Operating Temperature | -40°C | |
| Number of Elements per Chip | 2 | |
| Maximum Operating Temperature | 85°C | |
| Height | 0.38mm | |
| Length | 2.42mm | |
| Maximum Reverse Leakage Current | 100nA | |
| 選取全部 | ||
|---|---|---|
品牌 Nexperia | ||
Direction Type Uni-Directional | ||
Product Type ESD Protection Diode | ||
Diode Configuration Complex Array | ||
Minimum Breakdown Voltage Vbr 4.5V | ||
Mount Type Surface Mount | ||
Package Type WLCSP | ||
Maximum Reverse Stand-off Voltage Vwm 5V | ||
Pin Count 15 | ||
Maximum Peak Pulse Current Ippm 4A | ||
Clamping Voltage VC 6.5V | ||
ESD Protection Yes | ||
Test Current It 50mA | ||
Minimum Operating Temperature -40°C | ||
Number of Elements per Chip 2 | ||
Maximum Operating Temperature 85°C | ||
Height 0.38mm | ||
Length 2.42mm | ||
Maximum Reverse Leakage Current 100nA | ||
Common Mode filter for USB ports, No room for compromise, The most common Camera and display Interface used now for portable devices is the differential MIPI Interface running at RF frequencies. To allow operation at typical GSM/3G/LTE frequencies, a strong common-mode suppression over all bands and higher harmonics is needed. At the same time, a wide differential passband is needed to keep signal integrity. Since ESD can enter through gaps in the portable device, strong ESD protection is needed to avoid damage of the electronics or re-setting the system due to ESD strikes
Strong common-mode suppression > 14 dB in the range between 500 MHz and > 8 GHz
Wide passband > 2 GHz, ensuring signal integrity for all MIPI frequencies
ESD ruggedness > 15 kV contact, far exceeding IEC 61000-4-2 (8 kV contact)
Deep snap-back for optimized SoC protection against ESD strikes
Very thin package (0.5 mm max package height)
All LVDS signals needing a passband up to 2 GHz
相關連結
- Nexperia PCMF3USB3SZ 2-Element Uni-Directional ESD Protection Diode, 15-Pin WLCSP
- Nexperia 2-Element Uni-Directional ESD Protection Diode, 5-Pin WLCSP
- Nexperia PESD1USB3SZ 2-Element Uni-Directional ESD Protection Diode, 5-Pin WLCSP
- Nexperia PCMF2USB3SZ 2-Element Uni-Directional ESD Protection Diode 10-Pin WLCSP
- STMicroelectronics 2-Element Uni-Directional ESD Protection Diode, 13-Pin WLCSP
- STMicroelectronics OCVPB21-13F6 2-Element Uni-Directional ESD Protection Diode, 13-Pin WLCSP
- Nexperia 6-Element Uni-Directional ESD Protection Diode, 10-Pin DFN
- Nexperia PUSB3FR4Z 6-Element Uni-Directional ESD Protection Diode, 10-Pin DFN