Nexperia PCMF3USB3SZ 2-Element Uni-Directional ESD Protection Diode, 15-Pin WLCSP
- RS庫存編號:
- 153-0734
- 製造零件編號:
- PCMF3USB3SZ
- 製造商:
- Nexperia
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
- RS庫存編號:
- 153-0734
- 製造零件編號:
- PCMF3USB3SZ
- 製造商:
- Nexperia
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Nexperia | |
| Product Type | ESD Protection Diode | |
| Diode Configuration | Complex Array | |
| Direction Type | Uni-Directional | |
| Minimum Breakdown Voltage Vbr | 4.5V | |
| Mount Type | Surface | |
| Package Type | WLCSP | |
| Maximum Reverse Stand-off Voltage Vwm | 5V | |
| Pin Count | 15 | |
| ESD Protection | Yes | |
| Test Current It | 50mA | |
| Maximum Peak Pulse Current Ippm | 4A | |
| Minimum Operating Temperature | -40°C | |
| Clamping Voltage VC | 6.5V | |
| Maximum Operating Temperature | 85°C | |
| Number of Elements per Chip | 2 | |
| Width | 1.22mm | |
| Height | 0.38mm | |
| Length | 2.42mm | |
| Maximum Reverse Leakage Current | 100nA | |
| 選取全部 | ||
|---|---|---|
品牌 Nexperia | ||
Product Type ESD Protection Diode | ||
Diode Configuration Complex Array | ||
Direction Type Uni-Directional | ||
Minimum Breakdown Voltage Vbr 4.5V | ||
Mount Type Surface | ||
Package Type WLCSP | ||
Maximum Reverse Stand-off Voltage Vwm 5V | ||
Pin Count 15 | ||
ESD Protection Yes | ||
Test Current It 50mA | ||
Maximum Peak Pulse Current Ippm 4A | ||
Minimum Operating Temperature -40°C | ||
Clamping Voltage VC 6.5V | ||
Maximum Operating Temperature 85°C | ||
Number of Elements per Chip 2 | ||
Width 1.22mm | ||
Height 0.38mm | ||
Length 2.42mm | ||
Maximum Reverse Leakage Current 100nA | ||
Common Mode filter for USB ports, No room for compromise, The most common Camera and display Interface used now for portable devices is the differential MIPI Interface running at RF frequencies. To allow operation at typical GSM/3G/LTE frequencies, a strong common-mode suppression over all bands and higher harmonics is needed. At the same time, a wide differential passband is needed to keep signal integrity. Since ESD can enter through gaps in the portable device, strong ESD protection is needed to avoid damage of the electronics or re-setting the system due to ESD strikes
Strong common-mode suppression > 14 dB in the range between 500 MHz and > 8 GHz
Wide passband > 2 GHz, ensuring signal integrity for all MIPI frequencies
ESD ruggedness > 15 kV contact, far exceeding IEC 61000-4-2 (8 kV contact)
Deep snap-back for optimized SoC protection against ESD strikes
Very thin package (0.5 mm max package height)
All LVDS signals needing a passband up to 2 GHz
相關連結
- Nexperia PCMF3USB3SZ 2-Element Uni-Directional ESD Protection Diode, 15-Pin WLCSP
- Nexperia 2-Element Uni-Directional ESD Protection Diode, 5-Pin WLCSP
- Nexperia PESD1USB3SZ 2-Element Uni-Directional ESD Protection Diode, 5-Pin WLCSP
- Nexperia PCMF2USB3SZ 2-Element Uni-Directional ESD Protection Diode 10-Pin WLCSP
- STMicroelectronics 2-Element Uni-Directional ESD Protection Diode, 13-Pin WLCSP
- STMicroelectronics OCVPB21-13F6 2-Element Uni-Directional ESD Protection Diode, 13-Pin WLCSP
- Nexperia 6-Element Uni-Directional ESD Protection Diode, 10-Pin DFN
- Nexperia PUSB3FR4Z 6-Element Uni-Directional ESD Protection Diode, 10-Pin DFN