透過選取一個或多個屬性來查找類似產品。

COO (Country of Origin):: CN

SKF Seal, 20mm Inside Diameter, 37mm Outside Diameter - 20X37X7 HMSA10 RG

This radial shaft seal is designed to separate rotating and stationary machine parts, providing fluid retention and exclusion of contaminants in equipment that handles oil or grease. It features a rubber outer diameter and an additional non‑contacting lip to improve protection in polluted environments, making it suitable for rotating shafts where maintaining lubricant and excluding debris are required.

Features & Benefits

• Garter spring maintains tight contact with shaft for consistent sealing
• Auxiliary non‑contacting lip increases contamination exclusion efficiency
• Nitrile rubber lip resists oil and grease for extended service life
• Rubber outside diameter aids secure press‑fit into housing bore
• Permits circumferential speeds up to 4.12 m/s for moderate‑speed applications

Applications

• Suitable for sealing 20mm shaft assemblies in gearboxes and motors
• Ideal for bearing housings requiring rubber OD installation
• Used with rotating drives in automation equipment handling lubricants
• Can be used for replacement of shaft Seals in industrial machinery

What temperatures can it operate within during normal service?

It functions between −40°C to 100°C with short‑term tolerance up to 120°C.

What rotational limits should be observed to avoid premature wear?

Maximum rotational speed is 3960 r/min

exceeding this may reduce seal life.

How does it handle pressure differences across the seal?

It is rated for a pressure differential of 0.03 N/mm, suitable for low‑pressure retention tasks.

選取全部	屬性	值
	品牌	SKF
	Product Type	Seal
	Seal Type	Rotary Shaft Seal
	Thickness	7mm
	Seal Material	Nitrile Rubber (NBR)

	選取全部
	品牌 SKF
	Product Type Seal
	Seal Type Rotary Shaft Seal
	Thickness 7mm
	Seal Material Nitrile Rubber (NBR)

SKF Nitrile Rubber (NBR) Seal, 20 mm ID, 37 mm OD, 7 mm

訂單超過 $1,300.00 免費送貨