SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 37 mm OD, 6 mm

查看所有Seals

小計（1 包，共 10 件）*

TWD461.00

(不含稅)

TWD484.00

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 20 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
每包*
10 +TWD46.10TWD461.00

* 參考價格

RS庫存編號:
266-9034
製造零件編號:
25X37X6 HMSA10 RG
製造商:
SKF
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

SKF

Product Type

Seal

Seal Type

Rotary Shaft Seal

Thickness

6mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Seal, 25mm Inside Diameter, 6mm Thickness - 25X37X6 HMSA10 RG


This seal is a rotary shaft sealing solution designed to separate rotating and stationary parts in machinery, preventing lubricant loss and contamination ingress. It features a rubber outer profile with a single main sealing lip and an auxiliary non‑contacting lip to maintain effective exclusion of dirt and minimise leakage in polluted environments.

Features & Benefits


• Garter spring maintains consistent lip contact and sealing force
• Auxiliary lip improves contamination exclusion in dusty conditions
• Nitrile rubber compound resists oil and grease exposure
• Accommodates shaft misalignment to reduce wear
• Permits circumferential speed up to 5.03 m/s for moderate rpm usage

Applications


• Suitable for automation gearboxes requiring oil retention
• Ideal for electrical motor shafts in industrial equipment
• Used with bearings in mechanical drive assemblies
• Can be used for maintenance replacement in rotating housings

What temperature range can it operate within?


It supports continuous service from −40°C to 100°C and short peaks to 120°C.

What rotational speed limits should be observed?


Maximum rotational speed is 3,840 r/min, corresponding to a circumferential speed ceiling of 5.03 m/s.

How does the seal handle pressure differences?


The design tolerates a pressure differential of 0.03 N/mm, suitable for low‑pressure sealing applications.

What outer construction aids installation in housings?


The outside diameter is rubber with metal reinforcement to ensure secure seating in the bore.

Which shaft and bore sizes is it intended for replacement use with?


It is matched to a 25mm shaft and a 37mm housing bore with a 6mm section width.

相關連結