SKF Nitrile Rubber (NBR) Radial Shaft Seal, 17 mm ID, 32 mm OD, 7 mm

小計(1 包,共 10 件)*

TWD484.00

(不含稅)

TWD508.20

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 加上 20 件從 2026年10月05日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
每包*
10 +TWD48.40TWD484.00

* 參考價格

RS庫存編號:
266-8987
製造零件編號:
17X32X7 HMS5 RG
製造商:
SKF
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

SKF

Product Type

Radial Shaft Seal

Inside Diameter

17mm

Outside Diameter

32mm

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 17mm Inside Diameter, 32mm Outside Diameter - 17X32X7 HMS5 RG


This radial shaft seal is a rotary sealing component designed to prevent fluid leakage and exclude contaminants around rotating shafts. It is intended for use in rotary assemblies where a flexible, oil-resistant barrier is required, operating as the Interface between a rotating shaft and stationary housing.

Features and Benefits:


• Nitrile rubber construction provides resistance to oils and greases
• Rotary sealing lip design delivers continuous dynamic sealing performance
• 7mm cross-section supports consistent axial compression control
• Designed for 17mm inner bore to ensure secure shaft fit
• 32mm outer diameter enables firm press-fit into housings

Applications


• Suitable for gearboxes requiring oil containment
• Used with motors featuring 17mm shaft journals
• Ideal for pumps needing rotary lip sealing
• Can be used for maintenance oil seal replacement tasks
• Used for shaft-driven agricultural equipment assemblies

What material composes the flexible sealing element?


The seal is manufactured from nitrile rubber which offers compatibility with common lubricants and hydrocarbons.

How does the seal accommodate shaft fitment?


The internal bore is sized at 17mm to match shaft diameters and facilitate a snug interference fit during installation.

Which housing Interface dimension is required for press fitting?


The external diameter measures 32mm and is intended to be pressed into a corresponding housing bore for retention.

What axial dimension affects compression during installation?


The seal thickness is 7mm, which dictates the amount of axial compression and sealing lip preload when fitted.

Can this seal be sourced for oil-service replacements?


It is available in the specified 17x32x7 form factor for oil-seal replacement applications.

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。