SKF Nitrile Rubber (NBR) Radial Shaft Seal, 8 mm ID, 18 mm OD, 5 mm
- RS庫存編號:
- 267-0367
- 製造零件編號:
- 8X18X5 HMS5 RG
- 製造商:
- SKF
小計(1 包,共 10 件)*
TWD411.00
(不含稅)
TWD431.60
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 160 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 + | TWD41.10 | TWD411.00 |
* 參考價格
- RS庫存編號:
- 267-0367
- 製造零件編號:
- 8X18X5 HMS5 RG
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Inside Diameter | 8mm | |
| Product Type | Radial Shaft Seal | |
| Outside Diameter | 18mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 5mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Inside Diameter 8mm | ||
Product Type Radial Shaft Seal | ||
Outside Diameter 18mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 5mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 8mm Inside Diameter, 18mm Outside Diameter - 8X18X5 HMS5 RG
This radial shaft seal is a rotary sealing component designed to prevent lubricant leakage and exclude contaminants in rotating assemblies. It is intended for use where a Compact sealing solution is required around a rotating shaft, providing a tight Interface between the shaft and housing in confined assemblies.
Features and Benefits:
• Nitrile rubber construction provides oil resistance and flexible sealing
• Rotary design supports continuous shaft rotation without fluid loss
• Thin cross-section aids installation in restricted axial spaces
• Precision form delivers consistent contact and minimal leakage
• Suitable for small-bore applications requiring Compact sealing
• Rotary design supports continuous shaft rotation without fluid loss
• Thin cross-section aids installation in restricted axial spaces
• Precision form delivers consistent contact and minimal leakage
• Suitable for small-bore applications requiring Compact sealing
Applications
• Suitable for miniature gearboxes and micro transmissions
• Used with small electric motors and actuators
• Ideal for handheld power tools with rotating shafts
• Can be used for precision instrumentation rotary Seals
• Used for Compact pumps and miniature hydraulic units
• Used with small electric motors and actuators
• Ideal for handheld power tools with rotating shafts
• Can be used for precision instrumentation rotary Seals
• Used for Compact pumps and miniature hydraulic units
What material characteristics affect chemical compatibility?
The sealing lip is MADE from nitrile rubber which offers resistance to common mineral oils and greases while providing good elasticity for dynamic sealing.
How should the seal be installed relative to the shaft surface?
It should be pressed squarely into the housing bore so the sealing lip makes uniform contact with the shaft to prevent uneven wear.
What shaft fit considerations improve service life?
A smooth, correctly sized shaft with minimal runout reduces lip wear and maintains a stable sealing Interface during rotation.
How does seal thickness influence axial space requirements?
The 5 mm section thickness reduces the axial envelope, allowing use where clearance is limited without altering radial sealing performance.
相關連結
- SKF Nitrile Rubber (NBR) Seal 18 mm OD, 5 mm
- SKF Nitrile Rubber (NBR) Seal 30 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 28 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 35 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 32 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 90 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 80 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 80 mm OD, 12 mm
