SKF Nitrile Rubber (NBR) Radial Shaft Seal, 16 mm ID, 30 mm OD, 7 mm
- RS庫存編號:
- 266-8966
- 製造零件編號:
- 16X30X7 HMS5 RG
- 製造商:
- SKF
小計（1 包，共 10 件）*
TWD424.00
(不含稅)
TWD445.20
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 20 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 + | TWD42.40 | TWD424.00 |
* 參考價格
- RS庫存編號:
- 266-8966
- 製造零件編號:
- 16X30X7 HMS5 RG
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Inside Diameter | 16mm | |
| Product Type | Radial Shaft Seal | |
| Outside Diameter | 30mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Inside Diameter 16mm | ||
Product Type Radial Shaft Seal | ||
Outside Diameter 30mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 16mm Inside Diameter, 30mm Outside Diameter - 16X30X7 HMS5 RG
This radial shaft seal provides a sealing solution for rotary shafts, designed to prevent fluid leakage and exclude contaminants in rotating assemblies. It is manufactured from nitrile rubber (NBR) and suited to applications where a resilient elastomeric lip is required to maintain a barrier between shaft and housing during rotation.
Features and Benefits:
• Nitrile rubber composition resists common oils and greases
• Designed for rotary motion to maintain dynamic sealing contact
• Narrow cross-section reduces radial space requirement
• Robust lip geometry supports sustained rotational friction control
• Designed for rotary motion to maintain dynamic sealing contact
• Narrow cross-section reduces radial space requirement
• Robust lip geometry supports sustained rotational friction control
Applications
• Suitable for small gearbox output shafts
• Used with motor drives requiring oil retention
• Ideal for pump shaft sealing in Compact housings
• Can be used for bearing chamber contamination control
• Used with motor drives requiring oil retention
• Ideal for pump shaft sealing in Compact housings
• Can be used for bearing chamber contamination control
What internal clearance is required for proper installation?
A smooth shaft bore matching the specified inside diameter ensures even sealing contact and minimises leakage.
How does the material affect compatibility with lubricants?
The elastomer formulation provides general resistance to petroleum-based oils and common greases while maintaining flexibility at the sealing lip.
What housing bore condition is recommended for long service life?
A properly machined housing bore with correct concentricity to the shaft and minimal surface damage supports consistent sealing performance.
How should the seal be oriented during assembly?
The sealing lip must face the fluid or contaminant source so the dynamic lip contacts the shaft in operation.
相關連結
- SKF Nitrile Rubber (NBR) Radial Shaft Seal 30 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Radial Shaft Seal 62 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Radial Shaft Seal 85 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Radial Shaft Seal 35 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Radial Shaft Seal 35 mm OD, 6 mm
- SKF Nitrile Rubber (NBR) Radial Shaft Seal 58 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Radial Shaft Seal 32 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Radial Shaft Seal 55 mm OD, 10 mm