INA HK3512-B 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD

This roller bearing provides Compact radial support using a drawn cup needle construction designed for open-end installation in rotating assemblies. It is suited to applications requiring a slim outer profile and a parallel bore, delivering radial load transmission where space constraints dictate a small outside diameter combined with a moderate inner diameter.

• Steel cage ensures Durable retention and controlled roller guidance
• Single-row arrangement minimises assembly thickness while supporting radial loads
• Dynamic load capacity of 13.1 kN sustains operational stresses during rotation
• Static load rating of 21.3 kN resists deformation under stationary loads
• Grease-lubricated speed rating of 4,500 r/min supports regular-duty applications
• Limiting speed of 7,500 r/min allows occasional high-speed operation

• Suitable for Compact gearboxes with restricted radial clearance
• Used with shafts requiring a parallel-bore seating arrangement
• Ideal for linkages and pivots in light-industrial machinery
• Can be used for rotating shafts where an open end is necessary
• Suitable for drives with intermittent high-speed requirements

The cage is manufactured from steel, which provides roller guidance and retention.

The bore is a parallel type intended for press or slip-fit mounting on cylindrical shafts.

Grease lubrication supports a continuous speed up to 4,500 r/min with a higher limiting speed of 7,500 r/min for occasional use.

It offers a static load capacity of 21.3 kN to resist permanent set when stationary.

The dynamic radial load capacity is 13.1 kN for operating conditions.