INA SL192310 50 mm ID Roller Bearing, 110 mm OD

RS庫存編號:: 191-4511
製造零件編號:: SL192310
製造商:: INA

INA SL192310 50 mm ID Roller Bearing, 110 mm OD

查看所有Roller Bearings

可享批量折扣

小計（1 件）*

TWD12,689.00

(不含稅)

TWD13,323.45

(含稅)

訂單超過 $1,300.00 免費送貨

暫時缺貨

從 2026年6月16日發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 4	TWD12,689.00
5 - 9	TWD12,182.00
10 +	TWD11,926.00

* 參考價格

RS庫存編號:: 191-4511
製造零件編號:: SL192310
製造商:: INA

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	INA
	Product Type	Roller Bearing
	Inside Diameter	50mm
	Race Width	40mm
	Bore Type	Parallel
	Outside Diameter	110mm
	Static Load Rating	215kN
	Standards/Approvals	No
	End Type	Open
	Dynamic Load Rating	232kN

	選取全部
	品牌 INA
	Product Type Roller Bearing
	Inside Diameter 50mm
	Race Width 40mm
	Bore Type Parallel
	Outside Diameter 110mm
	Static Load Rating 215kN
	Standards/Approvals No
	End Type Open
	Dynamic Load Rating 232kN

Datasheet SL192310

Bearing arrangements are subjected to particularly high radial loads

Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑locating bearing function)

Bearing arrangements operating under the conditions described above must have very high rigidity

Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing

Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage

Particularly space-saving designs are required despite very high load

The bearings should be separable (not self-retaining) for easier mounting

INA SL192310 50 mm ID Roller Bearing, 110 mm OD

訂單超過 $1,300.00 免費送貨

批發價選項

相關連結