FAG 31308-XL Taper 40 mm ID Roller Bearing, 90 mm OD
- RS庫存編號:
- 190-8362
- 製造零件編號:
- 31308-XL
- 製造商:
- FAG
小計（1 件）*
TWD2,628.00
(不含稅)
TWD2,759.40
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年5月11日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD2,628.00 |
* 參考價格
- RS庫存編號:
- 190-8362
- 製造零件編號:
- 31308-XL
- 製造商:
- FAG
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 40 mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Cone Width | 25.25mm | |
| Series | 313 | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 89 KN | |
| End Type | Open | |
| Outside Diameter | 90 mm | |
| Static Load Rating | 83kN | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 40 mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Cone Width 25.25mm | ||
Series 313 | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 89 KN | ||
End Type Open | ||
Outside Diameter 90 mm | ||
Static Load Rating 83kN | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
相關連結
- FAG 23218-E1A-XL-K-M Taper 90 mm ID Roller Bearing, 160 mm OD
- FAG 22318-E1A-XL-K-M-C3 Taper 90 mm ID Spherical Roller Bearing, 190 mm OD
- FAG 33118 Taper Roller 90 mm ID Roller Bearing, 150 mm OD
- FAG 33018 Taper Roller 90 mm ID Roller Bearing, 140 mm OD
- FAG 31318 Taper Roller 90 mm ID Roller Bearing, 190 mm OD
- FAG 32948-XL Taper Roller 240 mm ID Tapered Roller Bearing, 320 mm OD
- FAG 31309-XL Taper 45 mm ID Roller Bearing, 100 mm OD
- FAG 32207-XL Taper 35 mm ID Roller Bearing, 72 mm OD