Microchip 16-Pin, SOIC HV9123NG-G 5-Channel PWM Controller, 3 MHz, 13.5V, Surface
- RS庫存編號:
- 829-3376
- 製造零件編號:
- HV9123NG-G
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 包，共 5 件）*
TWD532.00
(不含稅)
TWD558.60
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 | 每包* |
|---|---|---|
| 5 - 10 | TWD106.40 | TWD532.00 |
| 15 - 20 | TWD103.60 | TWD518.00 |
| 25 + | TWD102.20 | TWD511.00 |
* 參考價格
- RS庫存編號:
- 829-3376
- 製造零件編號:
- HV9123NG-G
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Maximum Switching Frequency | 3MHz | |
| Product Type | PWM Controller | |
| Supply Current | 1.3mA | |
| Output Voltage | 4.16V | |
| Zero Power Detection | No | |
| Output Current | 10mA | |
| Number of Outputs | 5 | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Minimum Supply Voltage | 9V | |
| Pin Count | 16 | |
| Maximum Supply Voltage | 13.5V | |
| Minimum Operating Temperature | -55°C | |
| Maximum Duty Cycle | 99% | |
| PWM Controller Type | Current Mode | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Series | HV91 | |
| Height | 1.65mm | |
| Length | 10mm | |
| Width | 4mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Maximum Switching Frequency 3MHz | ||
Product Type PWM Controller | ||
Supply Current 1.3mA | ||
Output Voltage 4.16V | ||
Zero Power Detection No | ||
Output Current 10mA | ||
Number of Outputs 5 | ||
Mount Type Surface | ||
Package Type SOIC | ||
Minimum Supply Voltage 9V | ||
Pin Count 16 | ||
Maximum Supply Voltage 13.5V | ||
Minimum Operating Temperature -55°C | ||
Maximum Duty Cycle 99% | ||
PWM Controller Type Current Mode | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Series HV91 | ||
Height 1.65mm | ||
Length 10mm | ||
Width 4mm | ||
Automotive Standard No | ||
HV912x Series High-Voltage Current-Mode PWM Controllers
The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.
These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.
Features
10 to 450V input voltage range
<1.3 mA supply current
>1.0 MHz clock
>20:1 dynamic range @ 500 kHz
Low internal noise
Typical Applications
Off-line high frequency power supplies
Universal input power supplies
High density power supplies
Very high efficiency power supplies
Extra wide load range power supplies