STMicroelectronics 20-Pin, SO-8 5-Channel PWM Controller, 75 kHz, 20V, Surface
- RS庫存編號:
- 175-1735
- 製造零件編號:
- STCMB1
- 製造商:
- STMicroelectronics
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計(1 管,共 40 件)*
TWD6,228.00
(不含稅)
TWD6,539.20
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 1,760 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每管* |
|---|---|---|
| 40 - 40 | TWD155.70 | TWD6,228.00 |
| 80 - 120 | TWD151.00 | TWD6,040.00 |
| 160 + | TWD146.50 | TWD5,860.00 |
* 參考價格
- RS庫存編號:
- 175-1735
- 製造零件編號:
- STCMB1
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Maximum Switching Frequency | 75kHz | |
| Product Type | PWM Controller | |
| Start-up Supply Current | 100μA | |
| Supply Current | 6mA | |
| Output Voltage | 5.2V | |
| Zero Power Detection | No | |
| Number of Outputs | 5 | |
| Mount Type | Surface | |
| Package Type | SO-8 | |
| Minimum Supply Voltage | 10V | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 20V | |
| Maximum Duty Cycle | 50% | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Width | 7mm | |
| Height | 2.65mm | |
| Length | 13mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Maximum Switching Frequency 75kHz | ||
Product Type PWM Controller | ||
Start-up Supply Current 100μA | ||
Supply Current 6mA | ||
Output Voltage 5.2V | ||
Zero Power Detection No | ||
Number of Outputs 5 | ||
Mount Type Surface | ||
Package Type SO-8 | ||
Minimum Supply Voltage 10V | ||
Pin Count 20 | ||
Maximum Supply Voltage 20V | ||
Maximum Duty Cycle 50% | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Width 7mm | ||
Height 2.65mm | ||
Length 13mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- COO (Country of Origin):
- PH
The STCMB1 device embodies a transition mode (TM) PFC, a high voltage double-ended controller for LLC resonant half-bridge, an 800 V-rated high voltage section and the glue logic that supervises the operation of these three blocks. The PFC section uses a proprietary constant on-time control methodology that does not require a sinusoidal input reference, thereby reducing the system cost and external component count.
800 V high voltage start-up with integrated
Active input filter capacitor discharge circuitry for reduced standby power
Independent debug mode for both converters
Enhanced constant on-time PFC with input voltage feedforward, THD optimizer
Complete set of protections: ac brown-in/out, inrush control, OVP, OCP, inductor saturation, feedback disconnection
Half-bridge operation up to 750 kHz with self-adjusting deadtime
(HSP) function for anti-capacitive mode
Synchronous burst mode operation
相關連結
- STMicroelectronics 20-Pin 75 kHz Surface
- STMicroelectronics 16-Pin 1000 kHz Surface
- STMicroelectronics 16-Pin 1000 kHz Surface
- STMicroelectronics 8-Pin 500 kHz Through Hole
- STMicroelectronics 8-Pin 500 kHz, 30V
- STMicroelectronics 8-Pin 300 kHz, 19V
- STMicroelectronics 8-Pin 500 kHz Through Hole
- STMicroelectronics 8-Pin 500 kHz Surface
