ABB Compact Series Push Button Switch, Momentary, Panel, 22 mm Cutout, 1 NO/1 NC, IP20, IP66, IP67, IP69K, 125 V 240 V

RS庫存編號:: 835-2826
製造零件編號:: 1SFA619105R1071 CP6-10R-11
製造商:: ABB

ABB Compact Series Push Button Switch, Momentary, Panel, 22 mm Cutout, 1 NO/1 NC, IP20, IP66, IP67, IP69K, 125 V 240 V

查看所有Push Button Switches

小計（1 件）*

TWD877.00

(不含稅)

TWD920.85

(含稅)

訂單超過 $1,300.00 免費送貨

有庫存

30 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD877.00

* 參考價格

RS庫存編號:: 835-2826
製造零件編號:: 1SFA619105R1071 CP6-10R-11
製造商:: ABB

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	ABB
	Switch Operation	Momentary
	Actuator Colour	Red
	Product Type	Push Button Switch
	Illuminated	No
	Series	Compact
	Panel Cutout Size	22 mm
	Mount Type	Panel
	Contact Configuration	1 NO/1 NC
	Terminal Type	Pre-Wired
	IP Rating	IP20, IP66, IP67, IP69K
	Contact AC Voltage	240V ac
	Minimum Operating Temperature	-25°C
	Actuator Style	Round
	Contact DC Voltage	125V
	Maximum Operating Temperature	70°C
	Switch Contact Current	2A
	Standards/Approvals	IEC / EN 60947-1IEC / EN 60947-5-1IEC / EN 60073IEC / EN 60529EN 50013DIN 40050-9UL 508CSA C22.2 No 14
	Length	61mm
	Height	37mm
	Width	37mm

	選取全部
	品牌 ABB
	Switch Operation Momentary
	Actuator Colour Red
	Product Type Push Button Switch
	Illuminated No
	Series Compact
	Panel Cutout Size 22 mm
	Mount Type Panel
	Contact Configuration 1 NO/1 NC
	Terminal Type Pre-Wired
	IP Rating IP20, IP66, IP67, IP69K
	Contact AC Voltage 240V ac
	Minimum Operating Temperature -25°C
	Actuator Style Round
	Contact DC Voltage 125V
	Maximum Operating Temperature 70°C
	Switch Contact Current 2A
	Standards/Approvals IEC / EN 60947-1IEC / EN 60947-5-1IEC / EN 60073IEC / EN 60529EN 50013DIN 40050-9UL 508CSA C22.2 No 14
	Length 61mm
	Height 37mm
	Width 37mm

ABB Compact Series Push Button Switch, 22mm Panel Cutout Size, Red Actuator - 1SFA619105R1071 CP6-10R-11

This push-button switch provides a compact, panel-mounted control solution for industrial electrical systems, offering momentary operation via a round red actuator. It is intended for use in automated and manual control panels where short-duration switching is required and robust environmental protection is needed.

Features and Benefits:

• 1NO/1NC contact arrangement enables versatile control logic
• Rated for 240V AC operation for mains signalling
• 125V DC contact rating supports low-voltage DC circuits
• Momentary operation allows fail-safe or interlock functions
• Pre-wired terminals speed up installation and reduce wiring errors
• Protected to IP20/IP66/IP67/IP69K for harsh environments

Applications

• Suitable for control panels in factory automation lines
• Ideal for machine start/stop and emergency signalling
• Used with motor starters and relay control circuits
• Can be used for operator stations in washdown environments

What temperature range can I expect during operation?

The switch is specified to operate between -25°C and 70°C, allowing use across typical industrial ambient conditions.

How much current can each contact carry?

Each switching contact is rated for 2A, providing clear limits for load selection and contactor interfacing.

What mounting cut-out do I need to prepare on the panel?

The device requires a 22mm panel cut-out for secure mounting and correct sealing.

What approvals and standards relate to safety and interoperability?

It conforms to IEC/EN standards including 60947-1 and 60947-5-1 Plus relevant EN, DIN and UL/CSA entries for industrial electromechanical controls.