STMicroelectronics VN9E30FTR High Side, High Side Power Switch IC 32-Pin, QFN 6 x 6

RS庫存編號:: 285-635
製造零件編號:: VN9E30FTR
製造商:: STMicroelectronics

STMicroelectronics VN9E30FTR High Side, High Side Power Switch IC 32-Pin, QFN 6 x 6

此圖片僅供參考，請參閲產品詳細資訊及規格

暫時無法供應

抱歉，我們不知道何時會到貨。

RS庫存編號:: 285-635
製造零件編號:: VN9E30FTR
製造商:: STMicroelectronics

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	STMicroelectronics
	Product Type	Power Switch IC
	Power Switch Type	High Side
	Power Switch Topology	High Side
	Number of Outputs	6
	Power Rating	4.06W
	Interface Type	SPI
	Package Type	QFN 6 x 6
	Maximum Supply Voltage	28V
	Pin Count	32
	Operating Current	35A
	Minimum Operating Temperature	-60°C
	Maximum Operating Temperature	150°C
	Standards/Approvals	IEC/EN 60947-7-1, IEC/EN 2
	Automotive Standard	No

	選取全部
	品牌 STMicroelectronics
	Product Type Power Switch IC
	Power Switch Type High Side
	Power Switch Topology High Side
	Number of Outputs 6
	Power Rating 4.06W
	Interface Type SPI
	Package Type QFN 6 x 6
	Maximum Supply Voltage 28V
	Pin Count 32
	Operating Current 35A
	Minimum Operating Temperature -60°C
	Maximum Operating Temperature 150°C
	Standards/Approvals IEC/EN 60947-7-1, IEC/EN 2
	Automotive Standard No

Datasheet - VN9E30FTR

The STMicroelectronics VN9E30F is a device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads directly connected to ground. The device is protected against voltage transient on the VCC pin (see ISO7637 transient compatibility table). Programming, control and diagnostics are implemented via the SPI bus. A digital current sense feedback for each channel is provided through an integrated 10-bit ADC with 0.1% of FSR. Dedicated trimming bits allow to adjust the ADC reference current. The device detects open-load in OFF-state conditions. Real time diagnostics is available through the SPI bus (open-load, output short to VCC, over temperature, communication error, power limitation or latch off). Output current limitation protects the device in an overload condition.

Integrated PWM engine with independent phase shift and frequency generation for each channel

Integrated 10 bit ADC for digital current sense

Programmable bulb or LED mode for all channels

Advanced limp home functions for robust fail safe system

Very low electromagnetic susceptibility

Control through direct inputs and/or SPI

Compliant with European directive 2002 or 95 or EC

Synchronous diagnostics of overload and short to GND and output shorted to VCC and OFF state open load events

Programmable case over temperature warning

Two level load current limitation

Self limiting of fast thermal transients

STMicroelectronics VN9E30FTR High Side, High Side Power Switch IC 32-Pin, QFN 6 x 6

相關連結

第一時間了解我們的最新產品和優惠