Festo 50 mm Bellow Nitrile Rubber (NBR) Suction Cup ESS-50-BN M6

RS庫存編號:: 202-2717
製造零件編號:: ESS-50-BN
製造商:: Festo

Festo 50 mm Bellow Nitrile Rubber (NBR) Suction Cup ESS-50-BN M6

小計（1 件）*

TWD1,045.00

(不含稅)

TWD1,097.25

訂單超過 $1,300.00 免費送貨

有庫存

1 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD1,045.00

* 參考價格

RS庫存編號:: 202-2717
製造零件編號:: ESS-50-BN
製造商:: Festo

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Festo
	Pad Diameter	50mm
	Connection Size	M6
	Product Type	Suction Cup
	Pad Type	Bellow
	Pad Material	Nitrile Rubber (NBR)
	Connection Type	Vacuum Port
	Series	ESS
	Holding Force	72.6N
	Vacuum Entry Direction	Position of Connection On Top
	Standards/Approvals	RoHS
	Model Number	189390

	選取全部
	品牌 Festo
	Pad Diameter 50mm
	Connection Size M6
	Product Type Suction Cup
	Pad Type Bellow
	Pad Material Nitrile Rubber (NBR)
	Connection Type Vacuum Port
	Series ESS
	Holding Force 72.6N
	Vacuum Entry Direction Position of Connection On Top
	Standards/Approvals RoHS
	Model Number 189390

COO (Country of Origin):: JP

Festo ESS Series Suction Cup, 50mm Pad Diameter, 72.6N Holding Force - ESS-50-BN, Numeric Part Number: 189390

This suction cup is designed for vacuum handling in automated and manual pick-and-place systems, providing a compliant contact pad for handling a range of surfaces. It connects to a vacuum supply via a top-mounted vacuum port and is intended for industrial applications where secure temporary attachment is required.

Features and Benefits:

• Nitrile rubber pad offers chemical resistance and grip • Bellows pad design compensates for height and angle variation • 72.6N holding force supports firm part retention • M6 vacuum port allows Compact pneumatic connection • RoHS-compliant construction meets material-restriction requirements

Applications

• Suitable for component transfer in automation cells • Ideal for picking electronic and electrical assemblies • Used for mechanical part handling on assembly lines • Can be used for surface-sensitive gripping in test fixtures

What material properties affect surface compatibility?

The pad is MADE from nitrile rubber which provides good resistance to oils and moderate abrasion, aiding grip on slightly oily or textured surfaces.

How does the pad design assist alignment on uneven parts?

The bellows geometry enables axial compression and tilt accommodation, allowing the contact face to conform to slight offsets during pick-up.

What connection requirements are needed for integration?

The vacuum inlet uses an M6 thread size suitable for Compact fittings and standard small-bore pneumatic tubing or adaptors.

How should the component be positioned relative to the inlet for installation?

The vacuum entry is located at the TOP of the cup, so mounting should provide clear vertical access to the port for secure connection and serviceability.