RS Better World
INA PSHE30-XL-N Plummer Block House -, 30 mm ID
- RS庫存編號:
- 174-1377
- 製造零件編號:
- PSHE30-XL-N
- 製造商:
- INA
可享批量折扣
查看批量定價選項小計(1 件)*
TWD2,784.00
(不含稅)
TWD2,923.20
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 12 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD2,784.00 |
| 13 - 24 | TWD2,674.00 |
| 25 + | TWD2,619.00 |
* 參考價格
- RS庫存編號:
- 174-1377
- 製造零件編號:
- PSHE30-XL-N
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Plummer Block House | |
| Inside Diameter | 30mm | |
| Material | Cast Iron | |
| Centre Height | 42.9mm | |
| Mount Hole Size | M10 | |
| Length | 98mm | |
| Depth | 40mm | |
| Mount Hole Centre-to-Centre | 76.2mm | |
| Number of Bolts | 2 | |
| Standards/Approvals | No | |
| Series | PSHE | |
| Height | 82mm | |
| Better World Product | Yes | |
| Better World Claim | Extended Product Life, Saves Energy | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Plummer Block House | ||
Inside Diameter 30mm | ||
Material Cast Iron | ||
Centre Height 42.9mm | ||
Mount Hole Size M10 | ||
Length 98mm | ||
Depth 40mm | ||
Mount Hole Centre-to-Centre 76.2mm | ||
Number of Bolts 2 | ||
Standards/Approvals No | ||
Series PSHE | ||
Height 82mm | ||
Better World Product Yes | ||
Better World Claim Extended Product Life, Saves Energy | ||
Schaeffler PSHE Series Plummer Block House, 30mm Inside Diameter, Cast Iron - PSHE30-XL-N
This plummer Block house provides a cast iron mounted bearing housing designed to support rotating shafts in industrial assemblies. It accommodates a 30 mm bore bearing and positions the shaft at a 42.9 mm centre height for alignment in driven or idler applications. The housing incorporates two mounting bolts and is intended for installations requiring a rigid, sealed support for radial loads.
Features and Benefits:
• Full-complement needle roller set offers high radial load capacity
• Plastic plain washers on both sides reduce axial friction
• Drive-fit lubrication nipple enables convenient relubrication access
• Stud-type roller design provides integrated axial guidance
• Rated for continuous lubrication operation at 2600 r/min
• Plastic plain washers on both sides reduce axial friction
• Drive-fit lubrication nipple enables convenient relubrication access
• Stud-type roller design provides integrated axial guidance
• Rated for continuous lubrication operation at 2600 r/min
Applications
• Suitable for conveyor idler and guide roller supports
• Used with shaft assemblies requiring axial guidance
• Ideal for transfer equipment in material handling lines
• Can be used for Compact machine tool auxiliary rollers
• Used with shaft assemblies requiring axial guidance
• Ideal for transfer equipment in material handling lines
• Can be used for Compact machine tool auxiliary rollers
What thread is provided for fastening the housing?
The housing features M10x1 threaded stops with a 12 mm thread length.
How should the nut be torqued during installation?
The nut should be tightened to 15 Nm to secure the stud effectively.
What provisions exist for lubrication maintenance?
A NIPA1X4,5 drive-fit lubrication nipple is fitted to allow periodic grease replenishment.
What is the maximum recommended rotational speed with permanent grease?
Continuous operation is specified up to 2600 r/min when greased appropriately.
相關連結
- INA RSHE30-XL-N Plummer Block House -, 30 mm ID
- INA PASEY30-XL-N Plummer Block House -, 30 mm ID
- INA PASE30-XL-N Plummer Block House -, 30 mm ID
- INA RASEY30-XL-N Plummer Block House -, 30 mm ID
- INA RSHE40-XL-N Plummer Block House -, 40 mm ID
- INA RSHE35-XL-N Plummer Block House -, 35 mm ID
- INA RSHE25-XL-N Plummer Block House -, 25 mm ID
- INA PSHE40-XL-N Plummer Block House -, 40 mm ID
