- RS庫存編號:
- 733-0604
- 製造零件編號:
- 1838220000
- 製造商:
- Weidmüller
當前暫無庫存,可於20/08/2024發貨,6 工作日送達。
已增加
單價(不含稅) 個 (每包:5個)
TWD50.40
(不含稅)
TWD52.92
(含稅)
單位 | Per unit | Per Pack* |
5 - 20 | TWD50.40 | TWD252.00 |
25 - 45 | TWD49.20 | TWD246.00 |
50 + | TWD48.40 | TWD242.00 |
* 參考價格 |
- RS庫存編號:
- 733-0604
- 製造零件編號:
- 1838220000
- 製造商:
- Weidmüller
法例與合規
- COO (Country of Origin):
- DE
產品詳細資訊
Closed Ends Vertical SMT Headers
These SL-SMT series 5.08mm pitch Omnimate headers have a 3.2mm pin length and a high temperature body material making them suitable for Wave or Reflow soldering. This enable these Through Hole Reflow (THR) connectors to be used on appropriately designed boards using Surface Mount Technology (SMT).
Note
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
5.08mm Pitch -Weidmüller Omnimate Range
Weidmüller's Omnimate Range of 5.08mm pitch Two Part connectors allows wire-to-board connections through terminals using Leaf Spring and Spring Rising Clamp screw technology, or Tension Clamp and Push In screwless technology. The Weidmuller 8 Way Clamp Rising Terminal is suitable for a wide range of PCB design and connector uses.
• The PCB hole has a diameter of 1.3mm
• Screw clamp types accept wire up to 1.5mm²
• Tension clamp and IDC (screwless) options enable fast assembly times
• Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
• Polarising pins prevent mismatch connections.
• Screw clamp types accept wire up to 1.5mm²
• Tension clamp and IDC (screwless) options enable fast assembly times
• Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
• Polarising pins prevent mismatch connections.
規格
屬性 | 值 |
---|---|
Pluggable Terminal Block Type | Header |
Number of Contacts | 3 |
Pitch | 5.08mm |
Series | OMNIMATE SL |
Number of Rows | 1 |
Body Orientation | Straight |
Mounting Type | Through Hole |
Termination Method | Solder |
Current Rating | 19.0A |
Voltage Rating | 400 V |
Contact Material | Copper Alloy |