RS PRO Opaque Fluoroplastics PTFE Rod, 500 mm x 65 mm Diameter

This rod is highly resistant to chemicals and radiation, thanks to its PTFE construction. Its dielectric properties make it an excellent insulator, and it can withstand temperatures as high as +260°C. It has a high tensile strength of 25 MPa and is low-friction and low-adhesion.

Part of the RS PRO series, the rod is tested by engineers to give you full confidence in its performance. It meets DIN (Deutsches Institut für Nurmung, German Institute for Standardization) and ASTM-D (American Society for Testing and Materials) standards for plastic and elastomer testing. A UL 94 V-0 flammability rating from the science safety company Underwriters Laboratories means it's flame-retardant.

The fluoroplastics PTFE rod is suitable for pipe lining, high-frequency insulation and etching plates.

• Opaque in colour

• Length of 500 mm

• Diameter of 65 mm

• Elongation of 50%

• Density of 2.18 → 2.21 g/cm³

• Tensile strength of 25 MPa

• Hardness of 30 Ball Indentation

• Maximum operating temperature of +260°C

• Melting point of +327°C

• Thermal conductivity of 0.25 W/mK

• Water absorption of 0.3%

• UL 94 V-0 flammability rating

• Conforms to DIN 53479, DIN 53736 and ASTM-D 1929 for testing of plastics and elastomers