RS PRO Opaque Fluoroplastics PTFE Rod, 500mm x 25mm Diameter
- RS庫存編號:
- 196-9893
- 製造商:
- RS PRO
可享批量折扣
單價 1 袋 1 套**
TWD887.00
(不含稅)
TWD931.35
(含稅)
42 現貨庫存,可於6工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
Lot(s) | Per Lot |
---|---|
1 - 14 | TWD887.00 |
15 - 29 | TWD852.00 |
30 + | TWD816.00 |
** 參考價格
- RS庫存編號:
- 196-9893
- 製造商:
- RS PRO
- COO (Country of Origin):
- IT
RS PRO Opaque Fluoroplastics PTFE Rod, 500 mm x 25 mm Diameter
Made from highly durable PTFE (polytetrafluoroethylene), this opaque fluoroplastics rod is used in engineering and insulation applications. It's 500 mm in length with a diameter of 25 mm.
The low-friction and low-adhesion rod has a high tensile strength of 25 MPa. PTFE construction means it has excellent chemical and radiation resistance, and its dielectric properties make it useful for insulation. It can also withstand temperatures of up to +260°C, so it will hold up even under extreme conditions.
As part of the RS PRO series, this rod has been tested to ensure quality and safety. It also meets the German Institute for Standardization (Deutsches Institut für Nurmung, DIN) and American Society for Testing and Materials (AMST-D) standards for plastic and elastomer testing. Underwriters Laboratories (UL) has given it a flammability rating of UL 94 V-0.
You'll find this fluoroplastics PTFE rod useful for high-frequency insulation, pipe linings and roller coverings.
The low-friction and low-adhesion rod has a high tensile strength of 25 MPa. PTFE construction means it has excellent chemical and radiation resistance, and its dielectric properties make it useful for insulation. It can also withstand temperatures of up to +260°C, so it will hold up even under extreme conditions.
As part of the RS PRO series, this rod has been tested to ensure quality and safety. It also meets the German Institute for Standardization (Deutsches Institut für Nurmung, DIN) and American Society for Testing and Materials (AMST-D) standards for plastic and elastomer testing. Underwriters Laboratories (UL) has given it a flammability rating of UL 94 V-0.
You'll find this fluoroplastics PTFE rod useful for high-frequency insulation, pipe linings and roller coverings.
Features and Benefits
• Fluoroplastics PTFE (polytetrafluoroethylene) rod
• Opaque in colour
• Length of 500 mm
• Diameter of 25 mm
• Elongation of 50%
• Density 2.18 → 2.21 g/cm³
• Tensile strength 25 MPa
• Hardness of 30 Ball Indentation
• Maximum operating temperature of +260°C
• Melting point of +327°C
• Thermal conductivity 0.25 W/mK
• Water absorption 0.3%
• UL 94 V-0 flammability rating
• Conforms to DIN 53479, DIN 53736 and ASTM-D 1929 for testing of plastics and elastomers
• Opaque in colour
• Length of 500 mm
• Diameter of 25 mm
• Elongation of 50%
• Density 2.18 → 2.21 g/cm³
• Tensile strength 25 MPa
• Hardness of 30 Ball Indentation
• Maximum operating temperature of +260°C
• Melting point of +327°C
• Thermal conductivity 0.25 W/mK
• Water absorption 0.3%
• UL 94 V-0 flammability rating
• Conforms to DIN 53479, DIN 53736 and ASTM-D 1929 for testing of plastics and elastomers
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Note
The PTFE sheets supplied have a size tolerance of ±5 mm
Standards
DIN 53479; DIN 53736; ASTM-D 1929
屬性 | 值 |
---|---|
Colour | Opaque |
Length | 500mm |
Material | PTFE |
Form | Rod |
Rod Diameter | 25mm |
Density | 2.18 → 2.21g/cm³ |
Tensile Strength | 25 MPa |
Flammability Rating | UL 94 V-0 |
Maximum Operating Temperature | +260°C |
Suitability | Etching Plates & High Frequency Insulation, Pipe Lining, Pump Housing, Roller Covering, Slide Bearing & Runners |
Elongation | 50% |
Melting Point | +327°C |
Thermal Conductivity | 0.25W/mK |
Water Absorption | 0.3% |
Hardness | 30 Ball Indentation |