Igus KGLM-08 8mm Bore Spherical Bearing, 1.2 kN, 19 mm OD, 2.7 kN
- RS庫存編號:
- 488-4896
- 製造零件編號:
- KGLM-08
- 製造商:
- Igus
可享批量折扣
查看批量定價選項小計（1 件）*
TWD187.00
(不含稅)
TWD196.35
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 194 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 5 | TWD187.00 |
| 6 + | TWD181.00 |
* 參考價格
- RS庫存編號:
- 488-4896
- 製造零件編號:
- KGLM-08
- 製造商:
- Igus
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Igus | |
| Product Type | Spherical Bearing | |
| Bore Diameter | 8mm | |
| Outside Diameter | 19mm | |
| Static Load Rating - Radial | 2.7kN | |
| Static Load Rating - Axial | 1.2kN | |
| Material | Igumid G | |
| Standards/Approvals | No | |
| Width | 12mm | |
| Series | igubal | |
| 選取全部 | ||
|---|---|---|
品牌 Igus | ||
Product Type Spherical Bearing | ||
Bore Diameter 8mm | ||
Outside Diameter 19mm | ||
Static Load Rating - Radial 2.7kN | ||
Static Load Rating - Axial 1.2kN | ||
Material Igumid G | ||
Standards/Approvals No | ||
Width 12mm | ||
Series igubal | ||
豁免
- COO (Country of Origin):
- DE
Igus DryLin W Series Linear Guide Carriage, 1.2N Static Load Rating, Die Cast Zinc Carriage - WJUM-01-10
This linear guide carriage provides compact, low-load linear motion for precision positioning in constrained assemblies. Designed for use where minimal bearing force is required, it combines a small footprint with a lightweight construction to support guided sliding movement in automation and electronics equipment.
Features and Benefits:
• Static load capacity 1.2N for delicate component movement
• Die-cast zinc body offering reduced mass and form stability
• Slider carriage form for straightforward linear guidance
• Compact carriage length 29mm enabling tight installation
• Narrow carriage width 26mm for space-saving layouts
• Die-cast zinc body offering reduced mass and form stability
• Slider carriage form for straightforward linear guidance
• Compact carriage length 29mm enabling tight installation
• Narrow carriage width 26mm for space-saving layouts
Applications
• Suitable for miniature actuator slides in automation rigs
• Ideal for PCB handling and pick-and-place tooling
• Used with small optical stages in electronics inspection
• Can be used for sensor positioning in electrical assemblies
• Ideal for PCB handling and pick-and-place tooling
• Used with small optical stages in electronics inspection
• Can be used for sensor positioning in electrical assemblies
What sort of load should I expect to move reliably with this component?
It is intended for very light-duty tasks and is rated to handle a static load of 1.2N, making it appropriate for small sensors, optics or light fittings.
What is the carriage construction and how does it affect mounting?
The carriage is formed from die-cast zinc, which reduces weight while providing a stable mounting surface compatible with compact support structures.
How does the carriage type influence integration into linear systems?
As a slider-style carriage, it provides a simple guided interface suited to applications requiring linear translation without complex mating hardware.
Can this unit serve as a direct replacement in tight assemblies?
Its compact 29mm length and 26mm width make it suitable for substitution where small dimensional envelopes are required and similar slider geometries are present.
Note
igubal® Spherical Bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.
相關連結
- Igus KGLM-10 10 mm Bore Spherical Bearing 22 mm OD, 4 kN
- Igus KGLM-20 20 mm Bore Spherical Bearing 40 mm OD, 10 kN
- Igus KGLM-16 16 mm Bore Spherical Bearing 32 mm OD, 8 kN
- Igus KGLM-12 12 mm Bore Spherical Bearing 26 mm OD, 5.4 kN
- Igus ECLM-20-08-HD 20 mm Bore Spherical Bearing 36 mm OD, 3 kN
- SKF GE 10 E 10 mm Bore Spherical Bearing 19 mm OD
- SKF GE 10 C 10 mm Bore Spherical Bearing 19 mm OD
- Igus ECLM-10-05-HD 10 mm Bore Spherical Bearing 22 mm OD, 1.25 kN