Fluke 190 II ScopeMeter Series, 500 MHz Portable Oscilloscope, 4 Channels

RS庫存編號:: 271-0124
製造零件編號:: FLUKE-190-504/FPC EU
製造商:: Fluke

Fluke 190 II ScopeMeter Series, 500 MHz Portable Oscilloscope, 4 Channels

小計（1 件）*

TWD378,107.00

(不含稅)

TWD397,012.35

訂單超過 $1,300.00 免費送貨

有庫存

加上 4 件從 2026年10月12日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD378,107.00

* 參考價格

RS庫存編號:: 271-0124
製造零件編號:: FLUKE-190-504/FPC EU
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Product Type	Oscilloscope
	Bandwidth	500MHz
	Number of Channels	4
	Oscilloscope Type	Portable
	Oscilloscope Form	Digital Storage
	Interface Type	USB
	Screen Size	6 in
	Series	190 II ScopeMeter
	Standards/Approvals	ANSI/ISA 82.02.01, CAN/CSA C22.2, EN 61010-1:2010, UL 61010-1:2012, UL 61010B
	Depth	70mm
	Height	190mm
	Width	190mm
	Maximum Time Base	4s/div
	Rise Time	0.7ns
	Battery Type	Lithium-ion
	Minimum Time Base	1ms/div
	Power Source	Mains Adapter, Battery Power Supply
	Vertical Resolution	8 bit
	Display Type	LCD
	Battery Life	7h
	Safety Category Level	CAT III, CAT IV
	Safety Category Voltage	600V, 1V

	選取全部
	品牌 Fluke
	Product Type Oscilloscope
	Bandwidth 500MHz
	Number of Channels 4
	Oscilloscope Type Portable
	Oscilloscope Form Digital Storage
	Interface Type USB
	Screen Size 6 in
	Series 190 II ScopeMeter
	Standards/Approvals ANSI/ISA 82.02.01, CAN/CSA C22.2, EN 61010-1:2010, UL 61010-1:2012, UL 61010B
	Depth 70mm
	Height 190mm
	Width 190mm
	Maximum Time Base 4s/div
	Rise Time 0.7ns
	Battery Type Lithium-ion
	Minimum Time Base 1ms/div
	Power Source Mains Adapter, Battery Power Supply
	Vertical Resolution 8 bit
	Display Type LCD
	Battery Life 7h
	Safety Category Level CAT III, CAT IV
	Safety Category Voltage 600V, 1V

COO (Country of Origin):: RO

Fluke 190 II ScopeMeter Series Oscilloscope, 500MHz Bandwidth, 6 inch Screen Size - FLUKE-190-504/FPC EU

This oscilloscope is a portable digital storage instrument designed for field and industrial diagnostics, enabling waveform capture, analysis and long-term recording in dust- and drip-prone environments. It provides multi-channel isolated inputs for direct measurement on live equipment and supports both battery and mains operation for flexible on-site use.

Features and Benefits:

• 500MHz bandwidth with 0.7ns rise time for high-speed signal capture
• Four independent floating inputs offering up to 1000V isolation
• 5GS/s real-time single-channel sampling for transient detail
• Deep memory with 10,000 samples per trace for detailed analysis
• Battery operation up to 7h using higher-capacity Li‑Ion pack
• USB host and device ports for direct data storage and PC transfer

Applications

• Suitable for troubleshooting motor drives and inverters
• Ideal for capturing intermittent glitches on control signals
• Used with FFT analysis for frequency-spectrum diagnostics
• Can be used for long-term TrendPlot logging of measurements
• Suitable for on-site measurements requiring CAT III/CAT IV ratings

How does the instrument protect users when measuring high voltages?

The inputs are independently insulated and rated for safety categories up to CAT III 1000V and CAT IV 600V, limiting maximum floating voltage between any contact and earth/ground.

What recorder modes are available for extended monitoring?

It offers a roll-mode ScopeRecord with 30,000 points per channel and TrendPlot recording that stores 19,200 sample sets per measurement for long-duration logging.

How are captured waveforms archived without a PC?

A USB host port permits direct saving of waveform data, screen copies and complete datasets onto a flash memory drive up to 2GB.

What display and acquisition features aid Visual analysis?

The 6in full-colour LCD provides digital persistence modes, zoom to sample level and automatic replay of the last 100 captured screens.

How is battery swapping handled during field work?

The rechargeable Li‑Ion pack is accessible via a rear battery door allowing quick replacement while retaining RAM-backed data for a brief interval during exchange.