PicoScope 9000 Series, 5 GHz PC Based Oscilloscope 4-Channel

This oscilloscope is a PC-based test instrument designed to capture and analyse high-speed electrical signals when connected to a host computer. It operates from an AC adaptor and communicates via a universal interface, delivering measurements across a wide range of timebases and sensitivities for laboratory and field diagnostic tasks. Safety and electromagnetic performance align with recognised industry standards.

• 5GHz bandwidth provides wide-frequency signal acquisition
• 50ps rise time enables detection of very fast edges
• 12-bit vertical resolution improves waveform detail fidelity
• 10mV/div minimum sensitivity captures low-amplitude signals
• 0.05ns/div minimum timebase resolves fine temporal features

• Suitable for high-speed digital signal integrity analysis
• Ideal for multi-channel comparative timing measurements
• Used for RF front-end transient characterisation
• Can be used for troubleshooting high-frequency PCBs
• Used with software for detailed waveform post-processing

It provides four simultaneous input channels enabling concurrent waveform capture and comparative timing analysis.

The unit measures 232 mm in length, 245 mm in width and 60 mm in height for Compact bench placement.

Timebase selection spans from 0.05 ns/div up to 1000 s/div to cover fast transients and long-duration monitoring.

It complies with EN 61010-1:2010 for safety and EN 61326-1:2013 for electromagnetic compatibility.