PicoScope 6000E Series, 300 MHz PC Based Oscilloscope 4-Channel

RS庫存編號:: 201-7874
製造零件編號:: PicoScope 6403E
製造商:: Pico Technology

PicoScope 6000E Series, 300 MHz PC Based Oscilloscope 4-Channel

查看所有Oscilloscopes

小計（1 件）*

TWD188,456.00

(不含稅)

TWD197,878.80

(含稅)

訂單超過 $1,300.00 免費送貨

有庫存

3 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD188,456.00

* 參考價格

RS庫存編號:: 201-7874
製造零件編號:: PicoScope 6403E
製造商:: Pico Technology

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Pico Technology
	Product Type	Oscilloscope
	Bandwidth	300MHz
	Number of Channels	4
	Model Number	PicoScope 6403E
	Oscilloscope Type	PC Based
	Interface Type	USB
	Series	PicoScope 6000E
	Standards/Approvals	No
	Width	245mm
	Height	192mm
	Vertical Resolution	8 bit
	Power Source	AC Adapter
	Minimum Time Base	1ns/div
	Maximum Vertical Sensitivity	4mV/div
	Rise Time	1.3ns
	Maximum Time Base	5000s/div
	Minimum Vertical Sensitivity	2mV/div

	選取全部
	品牌 Pico Technology
	Product Type Oscilloscope
	Bandwidth 300MHz
	Number of Channels 4
	Model Number PicoScope 6403E
	Oscilloscope Type PC Based
	Interface Type USB
	Series PicoScope 6000E
	Standards/Approvals No
	Width 245mm
	Height 192mm
	Vertical Resolution 8 bit
	Power Source AC Adapter
	Minimum Time Base 1ns/div
	Maximum Vertical Sensitivity 4mV/div
	Rise Time 1.3ns
	Maximum Time Base 5000s/div
	Minimum Vertical Sensitivity 2mV/div

COO (Country of Origin):: GB

PicoScope 6000E Series Oscilloscope, 300MHz Bandwidth, 4 Channels - PicoScope 6403E

This oscilloscope is a PC-based instrument that captures and displays electrical signals when connected via USB. It provides a balanced combination of temporal and amplitude performance for laboratory diagnostics and field analysis, powered through an AC adaptor and controlled from a host computer. The unit complies with applicable environmental standards and connects using a common Interface for data acquisition and analysis.

Features and Benefits:

• 1ns/div time base for fine temporal resolution
• 1.3ns rise time enabling Rapid transient capture
• 2mV/div minimum sensitivity for small-signal measurement
• 8-bit vertical resolution for consistent amplitude sampling
• 4-channel configuration supporting multi-signal correlation

Applications

• Suitable for mixed-signal timing verification tasks
• Ideal for transient and Pulse response analysis
• Used with PC software for waveform recording and review
• Can be used for multi-channel sensor diagnostics
• Suitable for educational and research lab experiments

What input amplitude range can I expect to measure?

The instrument offers vertical sensitivity from 2mV/div up to 4V/div to accommodate both low-level signals and larger amplitudes.

How does the instrument Interface with a computer for data transfer?

It communicates over a USB connection and is powered using an AC adaptor to supply the necessary operating power.

What are the unit’s physical footprint and form factor?

The instrument measures 245mm in length, 192mm in width and 61.5mm in height, allowing desktop placement alongside a host PC.

Which environmental or material approvals does it meet?

It is produced in compliance with REACH, RoHS and WEEE standards.

What oscilloscope class and vertical resolution does it provide?

It is a PC-based oscilloscope with an 8-bit vertical resolution suitable for general-purpose waveform analysis.