RS PRO IDS-2000E Series, 200 MHz Bench Oscilloscope, 2 Channels
- RS庫存編號:
- 124-1953
- Distrelec 貨號:
- 304-20-978
- 製造商:
- RS PRO
小計（1 件）*
TWD68,330.00
(不含稅)
TWD71,746.50
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 4 個，準備發貨
單位 | 每單位 |
|---|---|
| 1 + | TWD68,330.00 |
* 參考價格
- RS庫存編號:
- 124-1953
- Distrelec 貨號:
- 304-20-978
- 製造商:
- RS PRO
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | RS PRO | |
| Product Type | Oscilloscope | |
| Bandwidth | 200MHz | |
| Number of Channels | 2 | |
| Oscilloscope Type | Bench | |
| Oscilloscope Form | Digital Storage | |
| Memory Depth | 1Mpts | |
| Interface Type | CAN, IIC, LIN, RS232, SPI, UART, USB | |
| Screen Size | 8 in | |
| Series | IDS-2000E | |
| Depth | 127.3mm | |
| Height | 384mm | |
| Width | 208mm | |
| Standards/Approvals | CE, EN 61340 | |
| Maximum Time Base | 100s/div | |
| Minimum Vertical Sensitivity | 1mV/div | |
| Waveform Refresh Rate | 120000per sec | |
| Maximum Vertical Sensitivity | 10V/div | |
| Minimum Time Base | 1ns/div | |
| Power Source | Mains | |
| Safety Category Voltage | 300V | |
| Safety Category Level | CAT I, CAT II | |
| Display Type | TFT LCD | |
| Vertical Resolution | 8 bit | |
| Plug Type | EU, UK | |
| Rise Time | 1.75ns | |
| 選取全部 | ||
|---|---|---|
品牌 RS PRO | ||
Product Type Oscilloscope | ||
Bandwidth 200MHz | ||
Number of Channels 2 | ||
Oscilloscope Type Bench | ||
Oscilloscope Form Digital Storage | ||
Memory Depth 1Mpts | ||
Interface Type CAN, IIC, LIN, RS232, SPI, UART, USB | ||
Screen Size 8 in | ||
Series IDS-2000E | ||
Depth 127.3mm | ||
Height 384mm | ||
Width 208mm | ||
Standards/Approvals CE, EN 61340 | ||
Maximum Time Base 100s/div | ||
Minimum Vertical Sensitivity 1mV/div | ||
Waveform Refresh Rate 120000per sec | ||
Maximum Vertical Sensitivity 10V/div | ||
Minimum Time Base 1ns/div | ||
Power Source Mains | ||
Safety Category Voltage 300V | ||
Safety Category Level CAT I, CAT II | ||
Display Type TFT LCD | ||
Vertical Resolution 8 bit | ||
Plug Type EU, UK | ||
Rise Time 1.75ns | ||
RS PRO IDS2202A Bench Digital Storage Oscilloscope, 200 MHz, 2 Channels
Use this RS PRO oscilloscope to measure changes in the voltage of an electrical signal over time. It visually displays electrical signals so you can evaluate and understand the behaviour of your electronic circuits.
The oscilloscope uses visual persistence oscilloscope (VPO) technology, meaning it applies a grayscale display of electric waveforms to distinguish between signals based on the frequency with which they occur. You can also identify the occurrence frequencies among various waveforms on the high-resolution thin-film-transistor liquid-crystal (TFT LCD) display by using different colour modes, ensuring easy-to-see and accurate readings.
Use the zoom feature and the play/pause button to navigate the waveform display with ease. The waveform update rate is extremely fast, enabling you to analyse inrush signals and elusive glitches in a high level of detail. You'll find this type of tool used in diagnostic, defect debugging and system development, as well as in electronic and electrical engineering.