FTDI Chip Multiprotocol Transceiver 16-Pin QFN, FT230XQ-T
- RS庫存編號:
- 200-1778
- 製造零件編號:
- FT230XQ-T
- 製造商:
- FTDI Chip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 4 件）*
TWD298.00
(不含稅)
TWD312.88
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 | 每包* |
|---|---|---|
| 4 - 120 | TWD74.50 | TWD298.00 |
| 124 - 240 | TWD72.80 | TWD291.20 |
| 244 + | TWD72.00 | TWD288.00 |
* 參考價格
- RS庫存編號:
- 200-1778
- 製造零件編號:
- FT230XQ-T
- 製造商:
- FTDI Chip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FTDI Chip | |
| Maximum Data Rate | 3Mbps | |
| Number of Transmitters | 1 | |
| Product Type | Multiprotocol Transceiver | |
| Number of Receivers | 1 | |
| Number of Transceivers | 1 | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 16 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 5.25V | |
| Transmitter Signal Type | Ttl | |
| Minimum Operating Temperature | -40°C | |
| Receiver Signal Type | Ttl | |
| Interface Standards | RS232, RS422, TTL, USB 2.0, RS485 | |
| Maximum Operating Temperature | 85°C | |
| Series | FT230X | |
| Power Supply Type | USB | |
| Standards/Approvals | RoHS, USB-IF Test-ID (TID) 40001463 (Rev D) | |
| Supply Current | 8mA | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 FTDI Chip | ||
Maximum Data Rate 3Mbps | ||
Number of Transmitters 1 | ||
Product Type Multiprotocol Transceiver | ||
Number of Receivers 1 | ||
Number of Transceivers 1 | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 16 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 5.25V | ||
Transmitter Signal Type Ttl | ||
Minimum Operating Temperature -40°C | ||
Receiver Signal Type Ttl | ||
Interface Standards RS232, RS422, TTL, USB 2.0, RS485 | ||
Maximum Operating Temperature 85°C | ||
Series FT230X | ||
Power Supply Type USB | ||
Standards/Approvals RoHS, USB-IF Test-ID (TID) 40001463 (Rev D) | ||
Supply Current 8mA | ||
Automotive Standard No | ||
The FTDI Chips FT230XQ series is full speed USB to basic serial UART interface device. It has a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count. It has 16 pin QFN package.
Asynchronous and synchronous bit bang modes
Operates between +3.3V and +5.25V
Configurable I/O pin output drive strength of 4mA (min) and 16mA (max)
相關連結
- FTDI Chip Multiprotocol Transceiver 16-Pin QFN
- FTDI Chip Multiprotocol Transceiver 48-Pin QFN
- FTDI Chip Multiprotocol Transceiver 48-Pin QFN, FT232HQ-REEL
- FTDI Chip Multiprotocol Transceiver 16-Pin SSOP
- FTDI Chip Multiprotocol Transceiver 16-Pin SSOP, FT230XS-U
- FTDI Chip Multiprotocol Transceiver 20-Pin
- FTDI Chip Multiprotocol Transceiver 20-Pin, FT231XQ-R
- FTDI Chip Multiprotocol Transceiver 48-Pin LQFP