Fluke T5-1000 + 1AC-II Multifunction Tester Set

RS庫存編號:: 731-8979
製造零件編號:: Fluke T5-H5-1AC II/UK
製造商:: Fluke

Fluke T5-1000 + 1AC-II Multifunction Tester Set

小計（1 件）*

TWD10,770.00

(不含稅)

TWD11,308.50

訂單超過 $1,300.00 免費送貨

有限的庫存

剩下 1 件，準備發貨
加上 9 件準備從其他地點發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD10,770.00

* 參考價格

RS庫存編號:: 731-8979
製造零件編號:: Fluke T5-H5-1AC II/UK
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Product Type	Multifunction Tester Set
	Model Number	T5-1000 + 1AC-II
	Maximum Voltage Measurement	1000V ac
	Test Type	Continuity, Resistance, SSR Isolated Flyback Converter, MOSFET
	Earth Resistance Measurement	No
	Battery Life	360h
	Length	30.5mm
	Height	203mm
	Weight	380g
	Standards/Approvals	EN 610101, CSA, VDE, IEC 60529, CE
	Width	51 mm
	IP Rating	IP52
	Test Standards	EN 61326
	Minimum Operating Temperature	-10°C
	Safety Category Level	CAT IV, CAT III
	Power Source	Battery
	Display Type	LED
	Battery Type	AA
	Safety Category Voltage	1000V
	Maximum Operating Temperature	50°C

	選取全部
	品牌 Fluke
	Product Type Multifunction Tester Set
	Model Number T5-1000 + 1AC-II
	Maximum Voltage Measurement 1000V ac
	Test Type Continuity, Resistance, SSR Isolated Flyback Converter, MOSFET
	Earth Resistance Measurement No
	Battery Life 360h
	Length 30.5mm
	Height 203mm
	Weight 380g
	Standards/Approvals EN 610101, CSA, VDE, IEC 60529, CE
	Width 51 mm
	IP Rating IP52
	Test Standards EN 61326
	Minimum Operating Temperature -10°C
	Safety Category Level CAT IV, CAT III
	Power Source Battery
	Display Type LED
	Battery Type AA
	Safety Category Voltage 1000V
	Maximum Operating Temperature 50°C

豁免

COO (Country of Origin):: MY

Fluke Multifunction Tester Set, 1000V Maximum Voltage Measurement, IP52 - Fluke T5-H5-1AC II/UK

This multifunction tester set is a Compact diagnostic kit for electricians and engineers to verify voltage, continuity, resistance and current on site. It combines a versatile voltage/continuity/current tester with a non-contact voltage detector to speed fault-finding and Basic electrical verification across installations, maintenance and service tasks.

Features & Benefits

• Measures AC/DC voltage to 1000V for high-voltage checks
• OpenJaw current sensing up to 100 A for clamp-style measurements
• Resistance range to 1000 Ω for circuit integrity assessment
• Continuity beeper for Rapid go/no-go confirmation
• IP52 ingress protection for use in dusty or damp locations
• Battery operation with AA cells delivering up to 360 h runtime

Applications

• Suitable for troubleshooting control panels and distribution boards
• Ideal for commissioning site wiring and verification of circuits
• Used for on-site maintenance of motors and industrial drives
• Can be used for fault diagnosis of MOSFETs, SSRs and isolated converters
• Suitable for quick live-voltage detection on sockets and cabling

How is current measured without disconnecting the circuit?

The tester uses an OpenJaw clamp-style sensor that lets you measure conductor current up to 100 A without opening the circuit path.

What protection levels does the kit provide for use on mains installations?

The instrument meets CAT IV 1000V and CAT III 1000V input protection standards and conforms to EN 61010 and related safety approvals.

How does the non-contact detector indicate presence of voltage?

The pocket-sized voltage detector provides a glowing tip Plus an audible beeper when it senses AC voltage, enabling quick identification of live conductors.

What environmental range and durability can I expect during site use?

It operates between -10 °C and 50 °C, withstands a 3M drop, and carries an IP52 rating for protection against limited dust ingress and dripping water.

Which measurement and test types are supported for electronic power components?

The kit supports continuity, resistance measurement, and tests relevant to SSRs, MOSFETs and isolated flyback converter scenarios.

Supplied with

Fluke T5-1000, Fluke 1AC II, H5 holster, batteries & instructions