Infineon TLE94104EPXUMA1, Stepper, DC Motor Motor Driver IC 14-Pin, PG-TSDSO-14
- RS庫存編號:
- 258-4155
- 製造零件編號:
- TLE94104EPXUMA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（2 件, 每袋2個）*
TWD136.00
(不含稅)
TWD142.80
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2,974 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 8 | TWD68.00 | TWD136.00 |
| 10 - 98 | TWD61.50 | TWD123.00 |
| 100 - 248 | TWD56.00 | TWD112.00 |
| 250 - 498 | TWD48.50 | TWD97.00 |
| 500 + | TWD46.00 | TWD92.00 |
* 參考價格
- RS庫存編號:
- 258-4155
- 製造零件編號:
- TLE94104EPXUMA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Product Type | Motor Driver IC | |
| Motor Type | Stepper, DC Motor | |
| Configuration | Half Bridge | |
| Mount Type | Surface | |
| Package Type | PG-TSDSO-14 | |
| Output Current | 2A | |
| Pin Count | 14 | |
| Maximum Supply Voltage | 20V | |
| Minimum Supply Voltage | -0.3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.15mm | |
| Standards/Approvals | RoHS | |
| Width | 6mm | |
| Series | TLE94104EP | |
| Length | 4.9mm | |
| Supply Current | 3mA | |
| Automotive Standard | AEC | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Product Type Motor Driver IC | ||
Motor Type Stepper, DC Motor | ||
Configuration Half Bridge | ||
Mount Type Surface | ||
Package Type PG-TSDSO-14 | ||
Output Current 2A | ||
Pin Count 14 | ||
Maximum Supply Voltage 20V | ||
Minimum Supply Voltage -0.3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1.15mm | ||
Standards/Approvals RoHS | ||
Width 6mm | ||
Series TLE94104EP | ||
Length 4.9mm | ||
Supply Current 3mA | ||
Automotive Standard AEC | ||
The MOTIX™ TLE9410EP is a protected four-fold half-bridge driver designed especially for automotive motion control applications
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high impedance are controlled from a 16-bit SPI interface. It offers diagnosis features such as short circuit, open load, power supply failure and overtemperature detection. In combination with its low quiescent current, this device is attractive among others for automotive applications. The small fine pitch exposed pad package, PG-TSDSO-14, provides good thermal performance and reduces PCB-board space and costs.
Summary of Features
•Four half bridge power outputs
•Very low power consumption in sleep mode
•3.3V / 5V compatible inputs with hysteresis
•All outputs with overload and short circuit protection
•Independently diagnosable outputs (overcurrent, open load)
•Open load diagnostics in ON-state for all high-side and low-side
•16-bit Standard SPI interface with daisy chain and in-frame response capability for control and diagnosis
•Fast diagnosis with the global error flag
•Overtemperature pre-warning and protection
•Over- and Undervoltage lockout
•Cross-current protection
Potential Applications
•HVAC Flap DC motors
•Monostable and bistable Relays
•Side mirror x-y adjustment and mirror fold