Infineon, Stepper, DC Motor Motor Driver IC 14-Pin, PG-TSDSO-14
- RS庫存編號:
- 258-4154
- 製造零件編號:
- TLE94104EPXUMA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 卷，共 3000 件）*
TWD100,200.00
(不含稅)
TWD105,210.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年9月02日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每卷* |
|---|---|---|
| 3000 - 3000 | TWD33.40 | TWD100,200.00 |
| 6000 + | TWD32.40 | TWD97,200.00 |
* 參考價格
- RS庫存編號:
- 258-4154
- 製造零件編號:
- TLE94104EPXUMA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Motor Type | Stepper, DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | Half Bridge | |
| Mount Type | Surface | |
| Package Type | PG-TSDSO-14 | |
| Output Current | 2A | |
| Pin Count | 14 | |
| Minimum Supply Voltage | -0.3V | |
| Maximum Supply Voltage | 20V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Series | TLE94104EP | |
| Length | 4.9mm | |
| Standards/Approvals | RoHS | |
| Height | 1.15mm | |
| Automotive Standard | AEC | |
| Supply Current | 3mA | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Motor Type Stepper, DC Motor | ||
Product Type Motor Driver IC | ||
Configuration Half Bridge | ||
Mount Type Surface | ||
Package Type PG-TSDSO-14 | ||
Output Current 2A | ||
Pin Count 14 | ||
Minimum Supply Voltage -0.3V | ||
Maximum Supply Voltage 20V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Series TLE94104EP | ||
Length 4.9mm | ||
Standards/Approvals RoHS | ||
Height 1.15mm | ||
Automotive Standard AEC | ||
Supply Current 3mA | ||
The MOTIX™ TLE9410EP is a protected four-fold half-bridge driver designed especially for automotive motion control applications
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high impedance are controlled from a 16-bit SPI interface. It offers diagnosis features such as short circuit, open load, power supply failure and overtemperature detection. In combination with its low quiescent current, this device is attractive among others for automotive applications. The small fine pitch exposed pad package, PG-TSDSO-14, provides good thermal performance and reduces PCB-board space and costs.
Summary of Features
•Four half bridge power outputs
•Very low power consumption in sleep mode
•3.3V / 5V compatible inputs with hysteresis
•All outputs with overload and short circuit protection
•Independently diagnosable outputs (overcurrent, open load)
•Open load diagnostics in ON-state for all high-side and low-side
•16-bit Standard SPI interface with daisy chain and in-frame response capability for control and diagnosis
•Fast diagnosis with the global error flag
•Overtemperature pre-warning and protection
•Over- and Undervoltage lockout
•Cross-current protection
Potential Applications
•HVAC Flap DC motors
•Monostable and bistable Relays
•Side mirror x-y adjustment and mirror fold