ROHM BD62120JEFJ-E2, Brushless Motor Driver IC 8-Pin, HTSOP-J8
- RS庫存編號:
- 264-583
- 製造零件編號:
- BD62120JEFJ-E2
- 製造商:
- ROHM
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 組，共 5 件）*
TWD303.00
(不含稅)
TWD318.15
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 135 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每膠帶* |
|---|---|---|
| 5 - 45 | TWD60.60 | TWD303.00 |
| 50 - 95 | TWD57.60 | TWD288.00 |
| 100 - 495 | TWD53.20 | TWD266.00 |
| 500 - 995 | TWD49.00 | TWD245.00 |
| 1000 + | TWD47.20 | TWD236.00 |
* 參考價格
- RS庫存編號:
- 264-583
- 製造零件編號:
- BD62120JEFJ-E2
- 製造商:
- ROHM
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ROHM | |
| Motor Type | Brushless | |
| Product Type | Motor Driver IC | |
| Configuration | Circular | |
| Mount Type | Surface | |
| Package Type | HTSOP-J8 | |
| Output Current | 2A | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 8V | |
| Maximum Supply Voltage | 28V | |
| Typical Switching Frequency | 100kHz | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 6mm | |
| Standards/Approvals | No | |
| Series | BD62120 | |
| Height | 1mm | |
| Automotive Standard | No | |
| Supply Current | 2.5mA | |
| 選取全部 | ||
|---|---|---|
品牌 ROHM | ||
Motor Type Brushless | ||
Product Type Motor Driver IC | ||
Configuration Circular | ||
Mount Type Surface | ||
Package Type HTSOP-J8 | ||
Output Current 2A | ||
Pin Count 8 | ||
Minimum Supply Voltage 8V | ||
Maximum Supply Voltage 28V | ||
Typical Switching Frequency 100kHz | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 85°C | ||
Length 6mm | ||
Standards/Approvals No | ||
Series BD62120 | ||
Height 1mm | ||
Automotive Standard No | ||
Supply Current 2.5mA | ||
The ROHM 36V 1-channel DC brush motor driver features a built-in H-bridge design and the driver can facilitate low power consumption by direct PWM. There are built in protection circuits in this IC. Each protection circuit operation contributes to set high reliability. This IC uses different production line against series model for the purpose of improving production efficiency. We recommend using this IC for your new development. Electric characteristics noted in Datasheet does not differ between Production Line. In addition, the data is disclosed for documents and design models unless otherwise specified.
Built-in logic input pull-down resistor
Cross-conduction Prevention Circuit
Thermal Shutdown Circuit
Over-current Protection Circuit
Under Voltage Lock out Circuit
Over Voltage Lock out Circuit