Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24V, SOT-23, 3-Pin
- RS庫存編號:
- 680-7090
- 製造零件編號:
- A1101ELHLT-T
- 製造商:
- Allegro Microsystems
可享批量折扣
查看批量定價選項小計（1 包，共 5 件）*
TWD197.00
(不含稅)
TWD206.85
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 45 件準備從其他地點送貨
- 最終 625 件從 2026年7月29日 起發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 5 - 745 | TWD39.40 | TWD197.00 |
| 750 - 1495 | TWD38.60 | TWD193.00 |
| 1500 + | TWD37.80 | TWD189.00 |
* 參考價格
- RS庫存編號:
- 680-7090
- 製造零件編號:
- A1101ELHLT-T
- 製造商:
- Allegro Microsystems
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | BiCMOS | |
| Mount Type | Surface | |
| Magnetic Type | Unipolar | |
| Minimum Supply Voltage | 3.8V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Height | 0.95mm | |
| Length | 2.98mm | |
| Series | A1101 | |
| Width | 1.91mm | |
| Response Time | 4μs | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 7.5mA | |
| 選取全部 | ||
|---|---|---|
品牌 Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology BiCMOS | ||
Mount Type Surface | ||
Magnetic Type Unipolar | ||
Minimum Supply Voltage 3.8V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Height 0.95mm | ||
Length 2.98mm | ||
Series A1101 | ||
Width 1.91mm | ||
Response Time 4μs | ||
Automotive Standard AEC-Q100 | ||
Supply Current 7.5mA | ||
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Continuous-time operation with fast power-on time and low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Factory-programmed at end of line for optimum performance
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor
Hall Effect Sensors, Allegro MicroSystems
相關連結
- Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24V 3-Pin
- Allegro Microsystems 1 Axis Surface Hall Effect Sensor 3.8 V 24V 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 2.4 V 5.5V 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5V 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5V 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 3 V 24V 3-Pin
- Allegro Microsystems 1 Axis Surface Hall Effect Sensor 4.5 V 5.5V SOT-23, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3.8 V 24V 3-Pin