Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V, SOT-23, 3-Pin
- RS庫存編號:
- 753-2018
- 製造零件編號:
- A1326LLHLT-T
- 製造商:
- Allegro Microsystems
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 2 件）*
TWD81.00
(不含稅)
TWD85.04
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 34 件準備從其他地點送貨
- 加上 1,034 件從 2026年1月05日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 748 | TWD40.50 | TWD81.00 |
| 750 - 1498 | TWD40.00 | TWD80.00 |
| 1500 + | TWD39.50 | TWD79.00 |
* 參考價格
- RS庫存編號:
- 753-2018
- 製造零件編號:
- A1326LLHLT-T
- 製造商:
- Allegro Microsystems
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | BiCMOS Chopper Stabilised | |
| Mount Type | Surface | |
| Magnetic Type | Linear | |
| Maximum Frequency Response | 17kHz | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 2.5mV/g | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 150°C | |
| Series | A132 | |
| Width | 1.91 mm | |
| Standards/Approvals | Pb Free | |
| Height | 0.95mm | |
| Length | 2.98mm | |
| Supply Current | 9mA | |
| Response Time | 32μs | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology BiCMOS Chopper Stabilised | ||
Mount Type Surface | ||
Magnetic Type Linear | ||
Maximum Frequency Response 17kHz | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 2.5mV/g | ||
Pin Count 3 | ||
Maximum Operating Temperature 150°C | ||
Series A132 | ||
Width 1.91 mm | ||
Standards/Approvals Pb Free | ||
Height 0.95mm | ||
Length 2.98mm | ||
Supply Current 9mA | ||
Response Time 32μs | ||
Automotive Standard No | ||
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.
Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.
Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.
Temperature-stable quiescent output voltage and sensitivity
Output voltage proportional to magnetic flux density
Low-noise output increases accuracy
Precise recoverability after temperature cycling
Ratiometric rail-to-rail output
Wide ambient temperature range: –40°C to 150°C
Immune to mechanical stress
Solid-state reliability
Enhanced EMC performance for stringent automotive applications
Hall Effect Sensors, Allegro MicroSystems
相關連結
- Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- Allegro Microsystems 1-Axis Surface Hall Effect Sensor 4.5 V 5.5 V SOT-23, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V SIP, 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 3 V 5.5 V 8-Pin
- Allegro Microsystems Surface Hall Effect Sensor 2.4 V 5.5 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3 V 5.5 V 5-Pin