Melexis Surface Hall Effect Sensor 3.5 V 24 V, TSOT, 23-Pin
- RS庫存編號:
- 194-2964
- 製造零件編號:
- US2881ESE-AAA-000-RE
- 製造商:
- Melexis
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
小計(1 包,共 25 件)*
TWD377.50
(不含稅)
TWD396.50
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 7,875 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 25 - 725 | TWD15.10 | TWD377.50 |
| 750 - 1475 | TWD14.70 | TWD367.50 |
| 1500 + | TWD14.50 | TWD362.50 |
* 參考價格
- RS庫存編號:
- 194-2964
- 製造零件編號:
- US2881ESE-AAA-000-RE
- 製造商:
- Melexis
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Melexis | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Magnetic Type | Bipolar | |
| Maximum Frequency Response | 10kHz | |
| Minimum Supply Voltage | 3.5V | |
| Package Type | TSOT | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 4.5mT | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 23 | |
| Height | 0.9mm | |
| Length | 3mm | |
| Width | 1.7 mm | |
| Series | US2881 | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Supply Current | 5mA | |
| 選取全部 | ||
|---|---|---|
品牌 Melexis | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology CMOS | ||
Mount Type Surface | ||
Magnetic Type Bipolar | ||
Maximum Frequency Response 10kHz | ||
Minimum Supply Voltage 3.5V | ||
Package Type TSOT | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 4.5mT | ||
Maximum Operating Temperature 85°C | ||
Pin Count 23 | ||
Height 0.9mm | ||
Length 3mm | ||
Width 1.7 mm | ||
Series US2881 | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
Supply Current 5mA | ||
The US2881 is a bipolar Hall-effect switch designed in mixed signal CMOS technology.
The device integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
Thanks to its wide operating voltage range and extended choice of temperature range, it is suitable for use in automotive and consumer applications.
The device is delivered in a TSOT for surface mount process and in a Plastic Single In Line (TO-92 flat) for through-hole mount.
Wide operating voltage range from 3.5 V to 24 V
Very high magnetic sensitivity
CMOS technology
Chopper-stabilized amplifier stage
Low current consumption
Open drain output
Thin SOT23 3L and flat TO-92 3L both packages
SE package north pole active
UA package south pole active
相關連結
- Melexis Surface Hall Effect Sensor 3.5 V 24 V 23-Pin
- Melexis Surface Hall Effect Sensor 3.5 V 24 V 3-Pin
- Melexis Surface Hall Switch 3.5 V 24 V 23-Pin
- Melexis Surface Hall Effect Sensor 1.5 V 3.6 V 3-Pin
- Melexis Surface Hall Effect Sensor 1.6 V 3.6 V 6-Pin
- Melexis Through Hole Hall Effect Latch 3.5 V 24 V 3-Pin
- Melexis 3-Axis Surface Hall Effect Sensor 2.2 V 3.6 V QFN, 16-Pin
- Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5 V 6-Pin
