Melexis Surface Hall Effect Sensor 1.6 V 3.6 V, UTQFN, 6-Pin
- RS庫存編號:
- 194-2954
- 製造零件編號:
- MLX92213ELD-AAA-000-RE
- 製造商:
- Melexis
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 25 件）*
TWD320.00
(不含稅)
TWD336.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年6月04日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 25 - 1225 | TWD12.80 | TWD320.00 |
| 1250 - 2475 | TWD12.60 | TWD315.00 |
| 2500 + | TWD12.30 | TWD307.50 |
* 參考價格
- RS庫存編號:
- 194-2954
- 製造零件編號:
- MLX92213ELD-AAA-000-RE
- 製造商:
- Melexis
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Melexis | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Magnetic Type | Latch | |
| Minimum Supply Voltage | 1.6V | |
| Package Type | UTQFN | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 6 | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | Pb Free | |
| Length | 1.5mm | |
| Series | MLX92213 | |
| Height | 0.35mm | |
| Width | 2 mm | |
| Response Time | 1.90ms | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Melexis | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology CMOS | ||
Mount Type Surface | ||
Magnetic Type Latch | ||
Minimum Supply Voltage 1.6V | ||
Package Type UTQFN | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 6 | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals Pb Free | ||
Length 1.5mm | ||
Series MLX92213 | ||
Height 0.35mm | ||
Width 2 mm | ||
Response Time 1.90ms | ||
Automotive Standard No | ||
The MLX92213 features an ultra-sensitive Hall-effect latch operating from 1.6 V to 3.6 V. The output is a Push-Pull type so that an external pull-up resistor is not needed for proper operation, hence reducing PCB component count.
his device is primarily targeting battery-operated applications. As the famous Hall-effect omnipolar switch MLX90248, the MLX92213 employs an awake/sleep strategy to reduce its power consumption versus a standard Hall-effect latch sensor.
The magnetic flux density is periodically evaluated against predefined thresholds. If the flux density is above/below the BOP/BRP thresholds, then the output changes its state accordingly. During the sleep mode the output is latched in its previous state. The design has been optimized for applications requiring extended operating lifetime in battery-powered systems.
相關連結
- Melexis Surface Hall Effect Sensor 1.6 V 3.6 V 6-Pin
- Melexis Surface Hall Effect Sensor 1.5 V 3.6 V 3-Pin
- Melexis Surface Hall Effect Sensor 3.5 V 24 V 3-Pin
- Melexis Surface Hall Effect Sensor 3.5 V 24 V 23-Pin
- Melexis 3-Axis Surface Hall Effect Sensor 2.2 V 3.6 V QFN, 16-Pin
- Melexis Surface Hall Switch 3.5 V 24 V 23-Pin
- Melexis Through Hole Hall Effect Latch 3.5 V 24 V 3-Pin
- DiodesZetex Surface Hall Effect Sensor 1.6 V 3.6 V 4-Pin