Melexis Through Hole Hall Effect Latch 3.5 V 24 V, TO-92, 3-Pin
- RS庫存編號:
- 194-2962
- 製造零件編號:
- US1881LUA-AAA-000-BU
- 製造商:
- Melexis
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
小計(1 包,共 10 件)*
TWD165.00
(不含稅)
TWD173.20
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 20 件準備從其他地點送貨
- 加上 17,160 件從 2026年1月28日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 240 | TWD16.50 | TWD165.00 |
| 250 - 490 | TWD16.20 | TWD162.00 |
| 500 + | TWD15.80 | TWD158.00 |
* 參考價格
- RS庫存編號:
- 194-2962
- 製造零件編號:
- US1881LUA-AAA-000-BU
- 製造商:
- Melexis
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Melexis | |
| Product Type | Hall Effect Latch | |
| Sensor Type | Hall Effect Sensors | |
| Technology | CMOS | |
| Mount Type | Through Hole | |
| Magnetic Type | Latch | |
| Maximum Frequency Response | 10kHz | |
| Minimum Supply Voltage | 3.5V | |
| Package Type | TO-92 | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 150°C | |
| Length | 4.3mm | |
| Height | 3.2mm | |
| Series | US1881 | |
| Standards/Approvals | RoHS | |
| Width | 1.6 mm | |
| Automotive Standard | No | |
| Supply Current | 5mA | |
| Response Time | 0.25μs | |
| 選取全部 | ||
|---|---|---|
品牌 Melexis | ||
Product Type Hall Effect Latch | ||
Sensor Type Hall Effect Sensors | ||
Technology CMOS | ||
Mount Type Through Hole | ||
Magnetic Type Latch | ||
Maximum Frequency Response 10kHz | ||
Minimum Supply Voltage 3.5V | ||
Package Type TO-92 | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 150°C | ||
Length 4.3mm | ||
Height 3.2mm | ||
Series US1881 | ||
Standards/Approvals RoHS | ||
Width 1.6 mm | ||
Automotive Standard No | ||
Supply Current 5mA | ||
Response Time 0.25μs | ||
- COO (Country of Origin):
- TW
The US1881 is a Hall-effect latch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
Thanks to its wide operating voltage range and extended choice of temperature range, it is quite suitable for use in automotive, industrial and consumer applications.
The US1881 has been proved its use into the industry by its widely usage in different markets.
The device is delivered in a TSOT for surface mount process and in a Plastic Single In Line (TO-92 flat) for through-hole mount.
Wide operating voltage range from 3.5 V to 24 V
High magnetic sensitivity – Multi-purpose
CMOS technology
Chopper-stabilized amplifier stage
Low current consumption
Open drain output
Thin SOT23 3L and flat TO-92 3L both packages
SE package North Pole active
UA package South Pole active
相關連結
- Melexis Through Hole Hall Effect Latch 3.5 V 24 V 3-Pin
- Melexis Surface Hall Effect Sensor 3.5 V 24 V 3-Pin
- Melexis Surface Hall Effect Sensor 3.5 V 24 V 23-Pin
- Melexis Surface Hall Switch 3.5 V 24 V 23-Pin
- Melexis Surface Hall Effect Sensor 1.6 V 3.6 V 6-Pin
- DiodesZetex Surface Hall Effect Latch Sensor 3.5 V 20 V 3-Pin
- DiodesZetex Through Hole Hall Effect Latch Sensor 3.5 V 20 V 3-Pin
- Taiwan Semiconductor Through Hole General Purpose Hall Effect Latch 3.5 V 20 V 3-Pin
