Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
- RS庫存編號:
- 170-9112
- 製造零件編號:
- A1220LUA-T
- 製造商:
- Allegro Microsystems
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 袋，共 500 件）*
TWD11,500.00
(不含稅)
TWD12,075.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 1,500 件從 2026年1月05日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每袋* |
|---|---|---|
| 500 - 2000 | TWD23.00 | TWD11,500.00 |
| 2500 + | TWD22.10 | TWD11,050.00 |
* 參考價格
- RS庫存編號:
- 170-9112
- 製造零件編號:
- A1220LUA-T
- 製造商:
- Allegro Microsystems
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Allegro Microsystems | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | Chopper Stabilised BiCMOS | |
| Mount Type | Through Hole | |
| Magnetic Type | Bipolar | |
| Maximum Frequency Response | 800kHz | |
| Minimum Supply Voltage | 3V | |
| Package Type | SIP | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Pin Count | 3 | |
| Length | 4.09mm | |
| Series | A122 | |
| Width | 1.52 mm | |
| Height | 3.02mm | |
| Standards/Approvals | Lead (Pb) Free | |
| Response Time | 25μs | |
| Supply Current | 4mA | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 Allegro Microsystems | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology Chopper Stabilised BiCMOS | ||
Mount Type Through Hole | ||
Magnetic Type Bipolar | ||
Maximum Frequency Response 800kHz | ||
Minimum Supply Voltage 3V | ||
Package Type SIP | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Pin Count 3 | ||
Length 4.09mm | ||
Series A122 | ||
Width 1.52 mm | ||
Height 3.02mm | ||
Standards/Approvals Lead (Pb) Free | ||
Response Time 25μs | ||
Supply Current 4mA | ||
Automotive Standard AEC-Q100 | ||
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
AEC-Q100 automotive qualified
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection
Hall Effect Sensors, Allegro MicroSystems
相關連結
- Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 2.4 V 5.5 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3.8 V 24 V 3-Pin
- Allegro Microsystems Through Hole Chopper Stabilised Precision Hall Effect Switch 3 V 24 V 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 3 V 3.6 V SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V SIP, 3-Pin